Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RESENE ARMOURBOND HARDENER
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
9342
Manufacturers & Suppliers
Resene Paints Ltd
manufacturer
32-50 Vogel Street Naense 5011 Wellington New Zealand
+64 4 577 0500
www.resene.co.nz
Emergency Contacts
NZ POISONS (24hr 7 days)
0600 764 766
24hr 7 days
CHEMWATCH EMERGENCY RESPONSE
+800 2436 2286
CHEMWATCH EMERGENCY RESPONSE
+612 9186 1132
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| diethylenetriamine | 111-40-0 | 1 - 5% | No |
| diethylenetriamine / MEK ketimine adduct with PGE | 68541-07-1 | 20 - 40% | No |
| hydrocarbons, C6-unsaturated, polymerised | 71302-83-5 | 15 - 30% | No |
| tetranthylenepentamine | 112-57-2 | 10 - 15% | No |
Notes
See section below for composition of Mixtures
First Aid Measures
Emergency procedures for chemical exposure incidents
If fumes or combustion products are inhaled remove from contaminated area. Lay patient clean. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary.
Symptoms: Inhalation of vapours or aerosols (mists, fumes) may cause lung oedema.
Immediately flush body and clothes with large amounts of water, using safety shower if available. Quickly remove all contaminated clothing, including footwear. Wash skin and hair with running water. Continue flushing with water until advised to stop by the Poisons Information Centre. Transport to hospital, or doctor. Injury should be irrigated for 20-30 minutes.
Immediately hold eyelids apart and flush the eye continuously with running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. Transport to hospital or doctor without delay. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. Injury should be irrigated for 20-30 minutes. Eye injuries require saline.
For advice, contact a Poisons Information Centre or a doctor at once. Urgent hospital treatment is likely to be needed. If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Transport to hospital or doctor without delay. Milk and water are the preferred diluents. No more than 2 glasses of water should be given to an adult.
Immediate Medical Attention
Transport to hospital or doctor without delay.
Medical Treatment
Respiratory stress is uncommon but present occasionally because of soft tissue edema. Unless exoblaschial intubation can be accomplished under direct vision, cricothyroidotomy or tracheotomy may be necessary. Oxygen is given as indicated. The presence of shock suggests perforation and mandates an intravenous line and fluid administration. Withhold oral feedings initially. If endoscopy confirms transmucosal injury start steroids only within the first 48 hours. Carefully evaluate the amount of tissue necrosis before assessing the need for surgical intervention. Patients should be instructed to seek medical attention whenever they develop difficulty in swallowing (dysphagia). Management is essentially supportive.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam.
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids, chlorine bleaches, pool chlorine etc. as ignition may result. WARNING: In use may form flammable/ explosive vapour-air mixtures.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear area of personnel and move upwind.
Drains for storage or use areas should have retention basins for pH adjustments and dilution of spills before discharge or disposal of material.
Clear area of personnel and move upwind.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
DO NOT allow clothing wet with material to stay in contact with skin. The substance accumulates peroxides which may become hazardous only if it evaporates or is distilled or otherwise treated to concentrate the peroxides.
If slight coloration of the ethyleneamine is acceptable, storage tanks may be made of carbon steel or black iron, provided they are free of rust and mill scale.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Unstable in the presence of incompatible materials.
See section 7
See section 7
See section 7
See section 7
See section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- CORROSIVE LIQUID, TOXIC, N.O.S.
- Transport Class
- Class 8 Subrisk 6.1
- Packing Group
- III
Special provisions 220;274 Limited quantity 5 L
Special provisions 223.274 Limited Quantities 5 L
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RESENE ARMOURBOND HARDENER?
The signal word is danger.
What is the physical form of RESENE ARMOURBOND HARDENER?
RESENE ARMOURBOND HARDENER is a liquid appearing as colourless clear liquid with mild odour . It has not available odor.
What is RESENE ARMOURBOND HARDENER used for?
9342
What are the hazard statements for RESENE ARMOURBOND HARDENER?
This substance has 13 hazard statements:
- H290: May be corrosive to metals
- H311: Toxic in contact with skin
- H314: Causes severe skin burns and eye damage
- H317: May cause an allergic skin reaction
- H318: Causes serious eye damage
- H332: Harmful if inhaled
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
- H335: May cause respiratory irritation
- H361: Suspected of damaging fertility or the unborn child
- H371: May cause damage to organs
- H412: Harmful to aquatic life with long lasting effects
- Harmful if swallowed
- Harmful to aquatic life
What is the melting point of RESENE ARMOURBOND HARDENER?
The melting point is Not Available and the boiling point is >115 °C.