Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS
- Product Code
- 597167
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint stripping agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methylene chloride | 75-09-2 | 30 - 60% | Yes |
| Phenol | 108-95-2 | 10 - 30% | Yes |
| Sodium dichromate | 10588-01-9 | 0.1 - 1% | Yes |
| Propylene oxide | 75-56-9 | 0.1 - 1% | Yes |
| Chloroform | 67-66-3 | 0.1 - 1% | Yes |
| Methyl chloride | 74-87-3 | 0.1 - 1% | Yes |
IDH number: 597167 Product name: BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections. Non hazardous components
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. Administer oxygen or artificial respiration as needed. Do not use mouth-to-mouth method if victim ingested or inhaled the substance.
Symptoms: Delayed effects possible after inhalation.
Remove contaminated clothing and footwear. Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention. Launder contaminated clothing before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.
Get immediate medical attention. Do not induce vomiting. If individual is conscious, wash out mouth with water. Provide a glass of water to dilute the material in the stomach.
Immediate Medical Attention
Get immediate medical attention for eye and ingestion exposure. Seek medical attention if symptoms develop or persist for inhalation and skin exposure.
Medical Treatment
Topical 10 % EDTA ointment can be used to treat chromate scabs and skin ulcers. A 10 % ascorbic acid solution may speed healing if applied promptly. Larger exposures may need additional treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage if safe to do so. Ventilate area. Do not allow product to enter sewer or waterways. Isolate area. Keep unnecessary personnel away.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-ST 6881 AERO known as TURCO 6881 *MBO 275GLS*
---
BONDERITE S-ST 5351 THIN AERO known as TURCO 5351 THIN *MBO 275GLS*
---
BONDERITE C-MC 6045 AERO known as TURCO 6045 *MBO 275 GLS*
---
BONDERITE S-ST 6776 LO AERO known as TURCO 6776-LO
---
BONDERITE S-ST 6877 AERO known as TURCO 6877
---
BONDERITE S-ST 1270-5 AERO known as TURCO 1270-5
---
BONDERITE C-AK 5578-GL AERO known as TURCO 5578-GL
---
BONDERITE C-SO 4460 AERO known as TURCO 4460
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Launder work clothes frequently. Do not store or consume food, drink, or tobacco products in areas where they may become contaminated with this material. Do not take internally. For industrial use only.
Store between 40 °F (4.4 °C) and 90 °F (32.2 °C). Keep the container tightly closed and in a cool, well-ventilated place. Open bung slowly to relieve any internal pressure. Store frost-free.
Wash thoroughly after handling. Launder work clothes frequently. Do not store or consume food, drink, or tobacco products in areas where they may become contaminated with this material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong reducing agents. Keep away from organic and combustible materials. Strong bases. Metals.
Thermal decomposition products are toxic and include hydrogen chloride and phosgene, in lesser amounts.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquids, toxic, n.o.s. (Phenol, Dichloromethane, Sodium dichromate)
- Transport Class
- 8 (6.1)
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS?
The signal word is danger.
What is the physical form of BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS?
BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS is a liquid with dark, yellow color. It has acrid odor.
What is the solubility of BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS?
Appreciable Water
What is BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS used for?
Paint stripping agents
What are the hazard statements for BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS?
This substance has 9 hazard statements:
- H302 + H332: HARMFUL IF SWALLOWED OR IF INHALED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H340: MAY CAUSE GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H360: MAY DAMAGE FERTILITY OR THE UNBORN CHILD.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE S-ST 5351 AERO known as TURCO 5351 (T-5469) *MBO 330GLS?
The melting point is Not determined and the boiling point is 40.6 °C (105.1 °F)calculated.