NextSDS Logo
Safety Data Sheet EN

BONDERITE L-GP GP 460 AEROACHES

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-GP GP 460 AEROACHES
Product Code
2501375

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Precautionary Statements

Not prescribed
Not prescribed
Not prescribed
Not prescribed

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Graphite 7782-42-5 30 - 60% Yes
Petrolatum 8009-03-8 30 - 60% Yes
White mineral oil (petroleum), highly refined 8042-47-5 10 - 30% Yes

IDH number: 2501375 Product name: BONDERITE L-GP GP 460 AEROACHES

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, immediately remove the affected person to fresh air.

Skin contact

Immediately wash skin thoroughly with soap and water.

Eye contact

In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.

Ingestion

Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.

Storage

For safe storage, store between 8 °C (46.4 °F) and 28 °C (82.4 °F)

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
---
Flash Point
200 °C (392°F) Pensky Martens closed cup
Molecular Weight
---
Vapor Density
---
Voc Content
0 g/l
Softening Point
---
State Under Standard Conditions
---
Metal Corrosion
---
Partition Coefficient
Not available.
Odor Threshold
Not available.
Colour
Gray / Grey
Relative Evaporation Rate
---
Solidification Point
---
Solubility In Water
Insoluble Water
Ph
Not applicable, Product is non-soluble (in water).
Explosive Limits
---
Crystallisation Point
---
Upper Explosive Limit
Not available.
Appearance
---
Density
1.199
Cloud Point
---
Properties Status
---
Boiling Point
300 °C (572°F)calculated
Physical State
Liquid
Solubility
Negligible
Melting Point
Not applicable, Product is a liquid
Flammability
Not applicable
Colour Intensity
---
Evaporation Rate
Not applicable
Dynamic Viscosity
Not available.
Auto Ignition Temperature
Not determined
Lower Explosive Limit
Not available.
Vapor Pressure
< 1 hPa (20 °C (68°F))
Kinematic Viscosity
> 20.5 mm2/s
Solubility In Fat
---
Bulk Density
---
Freezing Point
---
Form
---
Odor
Slight
Decomposition Temperature
Not available.
Physical State Data
liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. High temperatures.

Incompatible

This product may react with strong oxidizing agents.

Decomposition

Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE L-GP GP 460 AEROACHES?

The signal word is no signal word.

What is the physical form of BONDERITE L-GP GP 460 AEROACHES?

BONDERITE L-GP GP 460 AEROACHES is a liquid with gray / grey color. It has slight odor.

What is the solubility of BONDERITE L-GP GP 460 AEROACHES?

Negligible

What is BONDERITE L-GP GP 460 AEROACHES used for?

Lubricant

What is the melting point of BONDERITE L-GP GP 460 AEROACHES?

The melting point is Not applicable, Product is a liquid and the boiling point is 300 °C (572°F)calculated.