Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208
- Product Code
- 1224685
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Molybdenum disulphide | 1317-33-5 | 60 - 80% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic < 3%DMSO | 64742-65-0 | 10 - 30% | Yes |
| Distillates (petroleum), hydrotreated heavy paraffinic (not cmr) | 64742-54-7 | 5 - 10% | Yes |
| Rubber, natural | 9006-04-6 | 1 - 5% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek immediate medical attention for eye contact. Seek medical attention if symptoms develop or persist for inhalation, skin contact, and ingestion.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, extinguishing powder, carbon dioxide.
Water may be an ineffective extinguishing medium.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP M 210 DRYFILM COATING ACHESON known as MOLYDAG210
---
BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R
---
BONDERITE L-GP 741 GREASE ACHESON
---
BONDERITE L-GP 5450B LUBRICANT ACHESON known as DAG 5450B
---
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Ground and bond all equipment as required (when transferring products). Do not take internally.
Store in a cool, dry, well-ventilated area. Keep container closed. Keep away from heat, spark and flame. Store away from strong oxidizers.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Avoid strong oxidizing agents.
Strong oxidizing agents.
Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208?
The signal word is no signal word.
What is the physical form of BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208?
BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208 is a liquid, paste with gray / grey color. It has hydrocarbon-like odor.
What is the solubility of BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208?
Insoluble Water
What is BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208 used for?
Lubricant
What is the melting point of BONDERITE L-GP M 208 MOLY LUBRICANT ACHESON known as MOLYDAG 208?
The melting point is -4 °C (24.8 °F) and the boiling point is > 260 °C (> 500°F) no method / method unknown.