Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451
- Product Code
- 767598
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial Metal Working Agents
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amine borate | 68586-07-2 | 5 - 10% | No |
| Diethylene Glycol | 111-46-6 | 1 - 5% | No |
| Boric acid (H3BO3), compd. with 2-(2-aminoethoxy) | 124756-59-8 | 1 - 5% | No |
| Benzene, mono-C10-13-alkyl derivs., fractionation bottoms, heavy ends, sulfonated, sodium salts | 148520-82-5 | 1 - 5% | No |
| Alcohols, C10-16, ethoxylated propoxylated~ | 69227-22-1 | 1 - 5% | No |
| Dicyclohexylamine | 101-83-7 | 0.1 - 1% | No |
| Methyl oxirane polymer with oxirane, monobutyl ether | 9038-95-3 | 0.1 - 1% | No |
| Triethanolamine | 102-71-6 | 1 - 5% | No |
| Amine salt(s) | --- | 10 - 30% | No |
| Oleylamidoethyleneoxyethanol | --- | 5 - 10% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
For skin contact flush with large amounts of water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Eliminate all sources of ignition or flammables that may come into contact with a spill of this material. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-MR B-200 MACHINING LUBRICANT known as MULTAN B-200
---
BONDERITE L-MR 5005M MACHINING LUBRICANT known as MULTAN 5005M
---
BONDERITE L-MR 8304 MACHINING LUBRICANT known as MULTAN 8304
---
BONDERITE L-MR 2140 MACHINING LUBRICANT known as MULTAN 2140
---
BONDERITE L-MR 9103 MACHINING LUBRICANT known as MULTAN 9103
---
BONDERITE L-FM 3107 MACHINING LUBRICANT known as MULTAN 3107
---
BONDERITE L-MR CR 46L METAL REMOVAL LUBRICANT known as MULTAN CR 46L
---
BONDERITE L-FM PL 1453 ACHESON STAMPING LUBRICANT known as MULTAN PL 1453
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not inhale vapors and fumes. Do not take internally. For industrial use only.
Store between 5 °C (41°F) and 50 °C (122°F)
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids, bases and oxidizing agents.
Upon decomposition, product emits acrid dense smoke with carbon dioxide, carbon monoxide, trace oxides of nitrogen and sulfur, and water.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451?
The signal word is danger.
What is the physical form of BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451?
BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451 is a liquid with brown color. It has amine odor.
What is the solubility of BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451?
Complete Water
What is BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451 used for?
Industrial Metal Working Agents
What are the hazard statements for BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-MR B-451 SEMI SYNTHETIC COOLANT known as MULTAN B-451?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F) calculated.