Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RENOFORM RO S 838
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
No application has been identified that is discouraged.
Manufacturers & Suppliers
FUCHS LUBRICANTS, SAU
manufacturer
Ferralla 27, 08755 Castellbisbal (Barcelona)
+34 935475859
Emergency Contacts
Emergency Contact
+34 935475859
8:00 - 17:00 (GMT+1)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation of synthetic oils with additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty alcohol, ethoxylated | --- | 0.1 - 1% | Yes |
| Triaryl phosphate, alkylated EC: 700-990-0 | --- | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air; if you experience any discomfort, consult a doctor.
Wash with soap and water.
Symptoms: Irritate the skin
Wash your eyes immediately with plenty of water, keeping your eyelids open.
Symptoms: Irritate the eyes
Rinse your mouth thoroughly.
Immediate Medical Attention
Get medical attention if you experience symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder, or water spray. Fight larger fires with alcohol-resistant foam or a water spray containing surfactant.
Water at full blast
Harmful gases may be formed in case of fire.
Move containers away from the fire area without putting yourself at risk.
Firefighter Protection
Use self-contained breathing apparatus and full protective clothing in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
In case of spills, you must be very careful when stepping on slippery surfaces and floors.
Prevent release into the environment. Safely stop any further leaks or spills. Prevent surface spread (e.g., by using barriers or oil containment booms). Report all major spills to the environmental manager.
Remove with absorbent material (sand, kieselgur, acid binder, universal binder, sawdust).
Materials: sand, kieselgur, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid aerosol formation. Do not eat, drink, or smoke while working. Observe the usual precautions for handling mineral oil products and chemicals. Follow the rules for the proper handling of chemicals.
Observe the provisions of the local water economy law, the national water laws and the regulations on facilities for handling substances hazardous to water (Regulations for facilities with substances hazardous to water in the version of the corresponding federal states).
Do not eat, drink, or smoke while working. Observe the usual precautions for handling mineral oil products and chemicals.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Adequate ventilation is recommended. The frequency of air renewal. The exposure limits must be appropriate to the conditions. If necessary, use exhaust hoods, local exhaust ventilation, or other technical measures to maintain exposure levels below recommended limits. If exposure limits have not been established, ensure that air quality is maintained at an acceptable level.
Material: Butylonitrile rubber. Minimum permeation time: >= 480 min. Recommended material thickness: >= 0.38 mm. Avoid prolonged or repeated skin contact. The supplier can recommend suitable gloves. Apply a protective cream to the skin for preventative purposes. Protective gloves: The exact penetration resistance time should be requested from the glove manufacturer. This time must be respected.
The use of protective eyewear (EN 166) is recommended during product transport. Avoid contact with skin and eyes. Eye/face protection is recommended. Wear protective eyewear or a face shield if there is a risk of splashing.
Ensure adequate ventilation/extraction in the workplace. Avoid inhalation of aerosols.
Do not put rags soaked with the product in your trouser pockets. Wear appropriate protective clothing.
No data available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
Stable under normal conditions of use.
Stable under normal conditions of use.
Stable under normal conditions of use.
Strong oxidizing agents. Strong acids. Strong bases.
Thermal reduction or combustion can release carbon monoxide or other toxic gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Based on the available data, the classification criteria are not met.
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
Biodegradable
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulation potential
12.4 Mobility on the ground:
12.5 Results of the PBT assessment and mPmB:
12.6 Properties of endocrine disorders
12.7 Other adverse effects:
The substance is classified as harmful to aquatic life with long-lasting effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste and refuse in accordance with local authority requirements.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU legislation: Regulation (EC) No 1005/2009 on substances that deplete the ozone layer, EU Regulation 2019/1021/EU on persistent organic pollutants (POPs), and Regulation (EC) No 649/2012 on the export and import of hazardous chemicals.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RENOFORM RO S 838?
The signal word is no signal word.
What is the physical form of RENOFORM RO S 838?
RENOFORM RO S 838 is a liquid appearing as clear with amber color. It has characteristic odor.
What is RENOFORM RO S 838 used for?
Lubricant
What are the hazard statements for RENOFORM RO S 838?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life, with harmful effects during radar detection.