RENOCAST RT10

Supply fresh air; consult doctor in case of symptoms.

Take off immediately all contaminated clothing. Immediately flush with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash contaminated clothing before reuse. Get medical attention. Wash with water and soap; pay attention: skin degreasing product.

Symptoms: Causes skin irritation.

Immediately flush with plenty of water for at least 15 minutes. If easy to do, remove contact lenses. Get medical attention.

Call a physician or poison control center immediately. Rinse mouth. Never give liquid to an unconscious person. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do NOT induce vomiting. Call a POISON CENTER or doctor/ physician if you feel unwell.

Symptoms: If ingested, material may be aspirated into the lungs and cause chemical pneumonitis.

CO2, fire extinguishing powder or fog like water spraying. Extinguish larger fires with alcohol resistant foam or spray water with suitable surfactant added

Avoid water in straight hose stream; will scatter and spread fire.

Can form explosive vapor-air mixtures at higher temperatures.

Move container from fire area if it can be done without risk.

Ventilate closed spaces before entering them. Keep upwind. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Keep unauthorized personnel away. In case of spills, beware of slippery floors and surfaces.

Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Prevent from spreading (e.g. by binding or oil barriers). Environmental manager must be informed of all major spillages.

Absorb with liquid-binding material (sand, diatomite, acidbinders, universal binders, sawdust).

Materials: liquid-binding material (sand, diatomite, acidbinders, universal binders, sawdust)

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid contact with skin. Wash hands thoroughly after handling. Do not eat, drink or smoke when working with the product. Take usual precautions when handling mineral oil products or chemical products.

Store locked up. Store in a well-ventilated place. Store in a cool place. Local regulations concerning handling and storage of waterpolluting products have to be followed. The precautions for storing and handling of flammable liquids have to be kept. Local regulations for common storage of flammable liquids have to be followed. Do not heat up to temperatures close to the flash point.

Wash hands thoroughly after handling. Do not eat, drink or smoke when working with the product. Observe good industrial hygiene practices.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground and bond container and receiving equipment. Take precautionary measures against static discharges.

Provide adequate ventilation. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

Material: Nitrile butyl rubber (NBR). Min. Breakthrough time: >= 480 min Recommended thickness of the material: >= 0,38 mm. Avoid long-term and repeated skin contact. Suitable gloves can be recommended by the glove supplier. Use skin protection cream for preventive skin protection. Protective gloves, where permitted in acc. to safety directions. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Safety glasses (EN 166) recommended during refilling. Avoid contact with eyes.

Ensure good ventilation/exhaustion at the workplace. Avoid breathing vapour/ aerosol.

Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.

No data available.

Material is stable under normal conditions.

Stable under normal use conditions.

Stable under normal use conditions.

Heat, sparks, flames.

Strong oxidizing substances. Strong acids. Strong bases.

Thermal decomposition or combustion may liberate carbon oxides and other toxic gases or vapors.

Dispose in accordance with all applicable regulations.

Discharge, treatment, or disposal may be subject to national, state, or local laws.