Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Technovit Universal Liquid
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin for metallographic testing
Manufacturers & Suppliers
Kulzer GmbH
manufacturer
Leipziger Straße 2, 63450 Hanau (Germany)
+49 (0)6181 9689-2570
Emergency Contacts
Emergency Contact
+49 (0)6132-84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms. Take affected persons into the open air and position comfortably
Instantly remove any clothing soiled by the product. Instantly wash with water and soap and rinse thoroughly.
Symptoms: skin irritation or rash
Rinse opened eye for several minutes under running water. Then consult doctor. Remove contact lenses, if present and easy to do. Continue rinsing.
Rinse out mouth and then drink plenty of water. In case of persistent symptoms consult doctor.
Immediate Medical Attention
Consult doctor in case of symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fire with alcohol-resistant foam.
Water with a full water jet.
Can form explosive gas-air mixtures. Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Bring persons out of danger.
For small amounts tissues
Prevent material from reaching sewage system, holes and cellars. Damp down gases/fumes/haze with water spray jet.
Absorb with liquid-binding material (diatomite, universal binders, for small amounts tissues). Send for recovery or disposal in suitable containers.
Materials: diatomite, universal binders, tissues
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep containers tightly sealed. Avoid contact with eyes and skin. Do not breathe vapor / mist / gas.
Store in cool, dry place in tightly closed containers. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. If skin contact cannot be avoided, protective gloves are recommended to avoid possible sensitization. Solvent resistant gloves. Check protective gloves prior to each use for their proper condition. recommended. NBR: acrylonitrile-butadiene rubber (0,11 mm). The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. >30 min
Safety glasses
Use breathing protection in case of insufficient ventilation. Filter A/P2.
Light weight protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
Possibility of hazardous reactions Polymerisation
No decomposition if used and stored according to specifications.
Strong oxidizers, amine, organic peroxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The product does not contain any substances that are assessed to be PBT or vPvB.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1247
- Shipping Name
- METHYL METHACRYLATE MONOMER, STABILIZED mixture
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Technovit Universal Liquid?
The signal word is danger.
What is the physical form of Technovit Universal Liquid?
Technovit Universal Liquid is a fluid appearing as fluid with colourless, yellowish, light brown color. It has characteristic odor.
What is Technovit Universal Liquid used for?
Resin for metallographic testing
What are the hazard statements for Technovit Universal Liquid?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
What is the melting point of Technovit Universal Liquid?
The melting point is Not determined and the boiling point is >35 °C.