Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Technovit Universal Liquid
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin for indirect surface testing and impressions
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Kulzer GmbH
manufacturer
Leipziger Straße 2, 63450 Hanau (Germany)
+49 (0)6181 9689-2570
Emergency Contacts
Emergency Contact
+49 (0)6132-84463
24-Hour-Number
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Instantly wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
Rinse out mouth and then drink plenty of water. Instantly call for doctor. In case of persistent symptoms consult doctor.
Immediate Medical Attention
Instantly call for doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder.
Water.
Can form explosive gas-air mixtures. Formation of toxic gases is possible during heating or in case of fire.
Firefighter Protection
Put on breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
for small amounts tissues
Prevent material from reaching sewage system, holes and cellars.
Absorb with liquid-binding material. Send for recovery or disposal in suitable containers.
Materials: diatomite, universal binders, for small amounts tissues
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep containers tightly sealed. Ensure good ventilation/exhaustion at the workplace.
Store in cool location. Store cool (not above 25 °C). Store in cool, dry conditions in well sealed containers.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not necessary with efficient local exhaust. Additional information about design of technical systems: No further data; see item 7.
If skin contact cannot be avoided, protective gloves are recommended to avoid possible sensitization. Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. For the permanent contact of a maximum of 15 minutes gloves made of the following materials are suitable: Butyl rubber, BR, Fluorocarbon rubber (Viton), Nitrile rubber, NBR, Chloroprene rubber, CR.
Safety glasses
Not necessary with efficient local exhaust. If exposition to vapours is possible, use breathing protective mask (filter A).
Light weight protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No further relevant information available.
No dangerous reactions known. If stored longer than recommended and/or above recommended temperature, product may polymerize generating heat.
No further relevant information available.
No further relevant information available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system. Small quantities can be polymerized with the matching system component(s) and the cured solid material can be disposed of with the regular garbage. Larger quantities must be disposed of following the regulations of the local authorities.
Small quantities can be polymerized with the matching system component(s) and the cured solid material can be disposed of with the regular garbage. Larger quantities must be disposed of following the regulations of the local authorities.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1247
- Shipping Name
- METHYL METHACRYLATE MONOMER, STABILIZED, solution
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Technovit Universal Liquid?
The signal word is danger.
What is the physical form of Technovit Universal Liquid?
Technovit Universal Liquid is a fluid with colourless color. It has characteristic odor.
What is Technovit Universal Liquid used for?
Resin for indirect surface testing and impressions
What are the hazard statements for Technovit Universal Liquid?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
What is the melting point of Technovit Universal Liquid?
The melting point is Not determined and the boiling point is 100 °C.