Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Technovit 3040 Powder
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Resin for metallographic testing
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Kulzer GmbH
manufacturer
Leipziger Straße 2, 63450 Hanau (Germany)
+49 (0)6181 9689-2570
Emergency Contacts
Emergency Contact
+49 (0)6132-84463
24-Hour-Number
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dibenzoyl peroxide EC: 202-327-6 | 94-36-0 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Instantly wash with water and soap and rinse thoroughly. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: skin irritation or rash
Rinse opened eye for several minutes under running water. Then consult doctor.
Rinse out mouth and then drink plenty of water. In case of persistent symptoms consult doctor.
Symptoms: persistent symptoms
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
In case of fire the following can be released: Carbon monoxide (CO), Carbon dioxide (CO2)
Firefighter Protection
Wear self-contained breathing apparatus. (EN 133)
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unprotected persons away.
If material reaches soil inform authorities responsible for such cases. Prevent material from reaching sewage system, holes and cellars. Do not allow to enter the ground/soil. Do not allow to enter drainage system, surface or ground water.
Collect mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin.
Store in cool, dry place in tightly closed containers.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Chemical protection gloves are suitable, which are tested according to EN 374. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Check protective gloves prior to each use for their proper condition. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. NBR: acrylonitrile-butadiene rubber (0,11 mm). Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. >30 min
eye protection (EN 166)
Use a mask with particle filter in case of dust generation. Filter P2.
Light weight protective clothing
Do not allow to enter the ground/soil. Do not allow to enter drainage system, surface or ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable if used and stored according to specifications.
No further relevant information available.
Risk of dust explosion if enriched with fine dust in presence of air
No decomposition if used and stored according to specifications.
Strong oxidizers
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (dibenzoyl peroxide)
- Transport Class
- 9
- Packing Group
- III
Warning: Miscellaneous dangerous substances and articles.
Warning: Miscellaneous dangerous substances and articles.
Warning: Miscellaneous dangerous substances and articles.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Technovit 3040 Powder?
The signal word is no signal word.
What is the physical form of Technovit 3040 Powder?
Technovit 3040 Powder is a solid. with different according to colour color. It has odourless odor.
What is Technovit 3040 Powder used for?
Resin for metallographic testing
What are the hazard statements for Technovit 3040 Powder?
This substance has 1 hazard statement:
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Technovit 3040 Powder?
The melting point is Not determined and the boiling point is 365 °C (94-36-0 dibenzoyl peroxide).