Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CM HG Füllprimer versch. Farbtöne 400ml
- Product Code
- 386183, 549663, 644719, 856525, 856532, 882432, 882449, 368547alt
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lacquer
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
Emergency Contact
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butanol EC: 201-148-0 | 78-83-1 | 5 - 10% | Yes |
| propan-1-ol EC: 200-746-9 | 71-23-8 | 20 - 25% | Yes |
| dimethyl ether EC: 204-065-8 | 115-10-6 | 12.5 - 20% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 10 - 12.5% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| butanone EC: 201-159-0 | 78-93-3 | 2.5 - 5% | Yes |
| Carbon black EC: 215-609-9 | 1333-86-4 | 2.5 - 5% | No |
| reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight = 700-1000) EC: 500-033-5 | 25068-38-6 | 2.5% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 2.5% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 2.5% | Yes |
| 1-methoxy-2-propanol EC: 203-539-1 | 107-98-2 | 2.5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 2.5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1A 1272/2008 EU), so the classification as carcinogen need not to apply.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire extinguishing methods suitable to surrounding conditions.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Use neutralising agent.
Related Products
Similar products with comparable safety profiles
COLORMATIC 1K FILLER BEIGE 400 ML
---
CM Kunststoff-Haftvermittler farblos 150ml
---
DUPLI-COLOR Sprayplast Verdünner 375ml
---
DUPLI-COLOR Sprayplast different colours 400ml
---
COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML
---
Berasit Linienmarkierer 600ml
---
DUPLI-COLOR Sprayplast different colours 750ml, 3000ml
---
1K Universal Fill in fuer Lsm-Lacke 100 ml
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Keep ignition sources away - Do not smoke. Keep respiratory protective device available.
Keep container tightly sealed.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products Solvent resistant gloves Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation - Material of gloves Butyl rubber, BR The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. - Penetration time of glove material Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min Butyl acetate: 60 min Ethyl acetate: 170 min Xylene: 42 min The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not necessary if room is well-ventilated. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases. SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow "separated from" class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CM HG Füllprimer versch. Farbtöne 400ml?
The signal word is danger.
What is the physical form of CM HG Füllprimer versch. Farbtöne 400ml?
CM HG Füllprimer versch. Farbtöne 400ml is a aerosol with according to product specification color. It has characteristic odor.
What is CM HG Füllprimer versch. Farbtöne 400ml used for?
Lacquer
What are the hazard statements for CM HG Füllprimer versch. Farbtöne 400ml?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H336: May cause drowsiness or dizziness.
What is the melting point of CM HG Füllprimer versch. Farbtöne 400ml?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..