NextSDS Logo
Pu

Puratronic®

DANGER SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Puratronic®
Product Code
10638
Chemical Name
nitrate d'ammonium

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Identified Uses
SU24 Scientific research and development

Overview

Puratronic® (CAS: 6484-52-2 ) commonly used su24 scientific research and development.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Ox. Sol. Category 1 H271
Skin Irrit. Category 2 H315
Eye Irrit. Category 2A H319
STOT SE Category 3 H335

GHS Hazard Pictograms & Safety Symbols

GHS03 GHS Hazard Pictogram: Oxidizing hazard - Materials that can cause or intensify fire and explosion

GHS03

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H271: May cause fire or explosion; strong oxidizer.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

Precautionary Statements

  • P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
  • P220: Keep/Store away from clothing/combustible materials.
  • P221: Take any precaution to avoid mixing with combustibles.
  • P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
  • P283: Wear fire/flame resistant/retardant clothing.
  • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P306+P360: IF ON CLOTHING: rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
  • P371+P380+P375: In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.
  • P405: Store locked up.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. company logo - Safety Data Sheet supplier organization

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

📍

30 Bond Street, Ward Hill, MA 01835-8099

🌍

US

📞

800-343-0660

📠

800-322-4757

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

(800) 343-0660

🕒

Monday-Friday, 8am-7pm EST

Carechem 24

📞

(866) 928-0789

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

substance

General Composition

Substances

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
nitrate d'ammonium
EC: 229-347-8
6484-52-2 100% ✓ Non-hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Symptoms:

May cause respiratory irritation.

🖐️ Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms:

Causes skin irritation.

👁️ Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms:

Causes serious eye irritation.

🍽️ Ingestion/Swallowing

Seek medical treatment.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

🧪 Physical State
Not available
📊 Physical State Data
Not available
📊 State Under Standard Conditions
Not available
👁️ Appearance
Not available
🎨 Colour
Not available
📊 Colour Intensity
Not available
📊 Form
Various forms (powder/flake/crystalline/beads, etc.)
👃 Odor
Odorless
📊 Odor Threshold
Not determined.
🧪 Ph
4.5-6.0
🧊 Melting Point
170 ℃ (338 °F)
Critical Property
💨 Boiling Point
210 °C (410 °F) (dec)
Critical Property
🔥 Flash Point
Not available
📊 Freezing Point
Not available
📊 Softening Point
Not available
📊 Solidification Point
Not available
📊 Cloud Point
Not available
📊 Crystallisation Point
Not available
📊 Relative Evaporation Rate
Not available
💨 Evaporation Rate
Not applicable.
💨 Vapor Pressure
Not applicable.
📊 Vapor Density
Not applicable.
📊 Relative Density
Not determined.
📊 Bulk Density
Not available
⚖️ Density
1.72 g/cm3 (14.353 lbs/gal)
Critical Property
🔥 Flammability
Contact with combustible material may cause fire.
📊 Upper Explosive Limit
Not determined
📊 Lower Explosive Limit
Not determined
📊 Explosive Limits
Not available
📊 Auto Ignition Temperature
Not determined.
📊 Decomposition Temperature
Not determined
💧 Solubility
Not available
📊 Partition Coefficient
Not determined.
📊 Solubility In Water
1900 g/l
📊 Solubility In Fat
Not available
📊 Molecular Weight
Not available
📊 Voc Content
Not available
📊 Metal Corrosion
Not available
📊 Dynamic Viscosity
Not applicable.
📊 Kinematic Viscosity
Not applicable.
📊 Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

🧤 Hand Protection

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness 0.11 mm.

👁️ Eye Protection

Safety glasses.

😷 Respiratory Protection

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.

🦺 Skin/Body Protection

Protective work clothing.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN1942

📦 Proper Shipping Name

Ammonium nitrate

⚠️ Transport Hazard Class

5.1

📋 Packing Group

III

🚢 IMDG Maritime Transport Precautions

F-H,S-Q

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Puratronic®?

The signal word for this substance is "danger".

What is Puratronic® used for?

SU24 Scientific research and development

What are the hazard statements for Puratronic®?

This substance has 4 hazard statements: H271: May cause fire or explosion; strong oxidizer. H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation.

What is the melting point of Puratronic®?

The melting point is 170 ℃ (338 °F) and the boiling point is 210 °C (410 °F) (dec).