Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
trans- mixture) is a clear substance commonly used for laboratory research purposes..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H227: Combustible liquid
- H302: Harmful if swallowed
- H315: Causes skin irritation
- H332: Harmful if inhaled
- H336: May cause drowsiness or dizziness.
Precautionary Statements
- Do not eat, drink or smoke when using this product. Wash hands and face thoroughly after handling. Avoid breathing fume, mist, vapors or spray. Use only outdoors or in a well-ventilated area. Wear protective gloves. Keep away from heat, sparks, open flames or other hot surfaces. - No smoking. Wear protective gloves, eye protection and face protection. If swallowed: Immediately call a poison center or doctor. Rinse mouth. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a poison center or doctor if you feel unwell. If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. In case of fire: Use dry chemical, CO2, water spray or alcohol-resistant foam to extinguish. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Store in well-ventilated place. Keep cool.
- Dispose of contents and container in accordance with US EPA guidelines for the classification and determination of hazardous waste listed in 40 CFR 261.3. (See Section 13)
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
TCI America
manufacturer
9211 N. Harborgate Street, Portland, OR 97203 U.S.A.
US
+1-800-423-8616
+1-888-520-1075
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
TCI America
+1-503-286-7624
US
8:00am - 5:00pm PST
Chemical Emergencies
Chemtrec
+1-800-424-9300
US
24-Hour
Transportation Emergencies
Chemtrec
+1-703-527-3887
US
24-Hour
Transportation Emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methylcyclohexanol (2-,3-,4- and cis-,trans- mixture) EC: 247-152-6 | 25639-42-3 | 90% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move victim to fresh air. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Keep victim warm and quiet.
Symptoms:
Dizziness.
🖐️ Skin Contact
Remove and wash contaminated clothing before re-use. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin with running water for at least 20 minutes.
Symptoms:
Redness.
👁️ Eye Contact
If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper eyelids. If eye irritation persists get medical advice/attention.
Symptoms:
Contact with material may irritate or burn eyes.
🍽️ Ingestion/Swallowing
Do not induce vomiting without medical advice. Call a physician or Poison Control Center immediately. Do not use mouth-to-mouth method if victim ingested the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Rinse mouth. Keep victim warm and quiet.
Symptoms:
Harmful if swallowed.
🚨 Immediate Medical Attention Required
WARNING: It might be hazardous to the person providing aid to give mouth-to-mouth respiration, because the inhaled material is harmful. If breathing has stopped, perform artificial respiration. Use first aid treatment according to the nature of the injury.
Medical Treatment
Use first aid treatment according to the nature of the injury.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. Ventilation is normally required when handling or using this product. Eyewash fountains should be provided in areas where there is any possibility that workers could be exposed to the substance. Follow safe industrial engineering/laboratory practices when handling any chemical.
🧤 Hand Protection
Wear protective gloves.
👁️ Eye Protection
Splash goggles.
😷 Respiratory Protection
Vapor respirator. Be sure to use a MSHA/NIOSH approved respirator or equivalent.
🦺 Skin/Body Protection
Lab coat.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN2617
📦 Proper Shipping Name
Methylcyclohexanols
⚠️ Transport Hazard Class
3 Flammable liquid
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for trans- mixture)?
The signal word for this substance is "warning".
What is the physical form of trans- mixture)?
trans- mixture) is a liquid appearing as clear with colorless - almost colorless color. It has no data available odor.
What is the solubility of trans- mixture)?
Slightly soluble in water; soluble in ether, alcohols
What is trans- mixture) used for?
For laboratory research purposes.
What are the hazard statements for trans- mixture)?
This substance has 5 hazard statements: H227: Combustible liquid H302: Harmful if swallowed H315: Causes skin irritation H332: Harmful if inhaled H336: May cause drowsiness or dizziness.
What is the melting point of trans- mixture)?
The melting point is No data available and the boiling point is 173°C (343ºF).