Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
European Community number - used for regulatory compliance in EU/EEA
Uses Information
Overview
anhydrous (CAS: 7775-11-3 ) is a crystalline substance commonly used su24 scientific research and development.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS06
GHS05
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H301: Toxic if swallowed.
- H312: Harmful in contact with skin.
- H330: Fatal if inhaled.
- H314: Causes severe skin burns and eye damage.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H317: May cause an allergic skin reaction.
- H340: May cause genetic defects.
- H350: May cause cancer.
- H360: May damage fertility or the unborn child.
- H372: Causes damage to the central nervous system, the lung and the blood through prolonged or repeated exposure. Route of exposure: Inhalation.
Precautionary Statements
- P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
- P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P320: Specific treatment is urgent (see on this label).
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.
manufacturer
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
800-343-0660
Monday-Friday, 8am-7pm EST
During normal business hours
Emergency Contact
Carechem
After normal business hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceGeneral Composition
Chemical characterization: Substances
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sodium chromate 024-018-00-3 EC: 231-889-5 | 7775-11-3 | 100% | Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Symptoms:
Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin Contact
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Symptoms:
Causes severe skin burns. Harmful in contact with skin.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Symptoms:
Causes serious eye damage.
Ingestion/Swallowing
Do not induce vomiting; immediately call for medical help.
Symptoms:
Toxic if swallowed.
Immediate Medical Attention Required
No further relevant information available.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Hand Protection
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.11 mm.
Eye Protection
Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU).
Respiratory Protection
Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.
Skin/Body Protection
Protective work clothing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
UN3288
Proper Shipping Name
TOXIC SOLID, INORGANIC, N.O.S. (Sodium chromate, anhydrous)
Transport Hazard Class
6.1 Toxic substances
Packing Group
II
ADR Transport Precautions
Warning: Toxic substances
IMDG Maritime Transport Precautions
Warning: Toxic substances
IATA Air Transport Precautions
Warning: Toxic substances
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for anhydrous?
The signal word for this substance is "danger".
What is the solubility of anhydrous?
530 g/l Soluble
What is anhydrous used for?
SU24 Scientific research and development
What are the hazard statements for anhydrous?
This substance has 10 hazard statements: H301: Toxic if swallowed. H312: Harmful in contact with skin. H330: Fatal if inhaled. H314: Causes severe skin burns and eye damage. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H317: May cause an allergic skin reaction. H340: May cause genetic defects. H350: May cause cancer. H360: May damage fertility or the unborn child. H372: Causes damage to the central nervous system, the lung and the blood through prolonged or repeated exposure. Route of exposure: Inhalation.
What is the melting point of anhydrous?
The melting point is 792 °C (1458 °F) and the boiling point is Not determined.