Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Gearlube RPC 75W/80W
- Product Code
- 02.10.32
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU21 Consumer uses: Private households / general public / consumers, PC24 Lubricants, greases, release products, PROC2 Use in closed, continuous process with occasional controlled exposure, PROC8a Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities, PROC8b Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities, PROC20 Heat and pressure transfer fluids in dispersive, professional use but closed systems, PROC9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing), ERC9a Wide dispersive indoor use of substances in closed systems, ERC9b Wide dispersive outdoor use of substances in closed systems, ERC4 Industrial use of processing aids in processes and products, not becoming part of articles, ERC7 Industrial use of substances in closed systems, Lubricating oil
Manufacturers & Suppliers
Kroon Oil BV
manufacturer
Dollegoorweg 15, NL-7602 EC ALMELO
+0031-(0)546-818165
Emergency Contacts
Emergency Contact
+31 (0)546 818165
9 AM to 4 PM, Monday to Friday
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polysulfides, di-tert-Bu EC: 273-103-3 | 68937-96-2 | 2.5 - 10% | Yes |
| zinc-tetrakis(1,3-dimethylbutyl) bis(phosphorodithioate) EC: 218-679-9 | 2215-35-2 | 1 - 2.5% | Yes |
| Interchangeable low viscosity base oil | --- | 1 - 2.5% | Yes |
* Contains one or more of the following CAS-numbers: 64741-88-4, 64741-89-5, 64741-95-3, 64741-96-4, 64741-97-5, 64742-01-4, 64742-52-5, 64742-53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-57-0, 64742-58-1, 64742-62-7, 64742-65-0, 64742-71-8, 68037-01-4, 72623-83-7, 72623-85-9, 72623-86-0, 72623-87-1, 74869-22-0, 8042-47-5, 848301-69-9. For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water.
Do not induce vomiting; call for medical help immediately.
Symptoms: If swallowed or in case of vomiting, danger of entering the lungs.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
EP Gear Lube 220
---
7705 - Industrial Gear Oil 68
---
7706 - Industrial Gear Oil 100
---
7711 - Industrial Gear Oil 680
---
7707 - Industrial Gear Oil 150
---
7728 - Industrial Synthetic Gear Oil 150
---
7708 - Industrial Gear Oil 220
---
7713 - Industrial Synthetic Gear Oil 100
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Wear gloves for the protection against chemicals according to EN 374. Oil resistant gloves. Material of gloves Penetration time of glove material: Nitrile rubber, NBR; PVC gloves; Neoprene gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. For continuous contact we recommend gloves with breakthrough time of more than 240 minutes with preference for > 480 minutes where suitable gloves can be identified. For short-term/splash protection we recommend the same, but recognise that suitable gloves offering this level of protection may not be available and in this case a lower breakthrough time may be acceptable so long as appropriate maintenance and replacement regimes are followed. Glove thickness is not a good predictor of glove resistance to a chemical as it is dependent on the exact composition of the glove material. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Goggles recommended during refilling
Not required.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Gearlube RPC 75W/80W?
The signal word is no signal word.
What is the physical form of Gearlube RPC 75W/80W?
Gearlube RPC 75W/80W is a fluid appearing as fluid, brown with brown color. It has characteristic odor.
What is the solubility of Gearlube RPC 75W/80W?
Not miscible or difficult to mix.
What is Gearlube RPC 75W/80W used for?
SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), SU3 Industrial uses: Uses of substances as such or in preparations at industrial sites, SU21 Consumer uses: Private households / general public / consumers, PC24 Lubricants, greases, release products, PROC2 Use in closed, continuous process with occasional controlled exposure, PROC8a Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at non-dedicated facilities, PROC8b Transfer of substance or preparation (charging/discharging) from/to vessels/large containers at dedicated facilities, PROC20 Heat and pressure transfer fluids in dispersive, professional use but closed systems, PROC9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing), ERC9a Wide dispersive indoor use of substances in closed systems, ERC9b Wide dispersive outdoor use of substances in closed systems, ERC4 Industrial use of processing aids in processes and products, not becoming part of articles, ERC7 Industrial use of substances in closed systems, Lubricating oil
What is the melting point of Gearlube RPC 75W/80W?
The melting point is Undetermined. and the boiling point is Undetermined..