NextSDS Logo
Safety Data Sheet EN

RICE EXTRUDED FLOUR

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RICE EXTRUDED FLOUR

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

D

DACSA GROUP

CARRETERA BARCELONA KM 5, ALMÁSSERA, VALENCIA, SPAIN

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

Dust from extruded rice flour and derived products can provoke rhinitis and asthma.
In addition, this powder can have an irritating effect that can cause eye pain and dry skin.
Dust from extruded rice flour can be flammable, and under certain conditions can form explosive clouds.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

100% RICE.

Chemical Name CAS Number Concentration Hazardous
RICE --- 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove affected person from area of exposure preferably into fresh air.

Symptoms: asthmatic reactions

Skin contact

cleaned from broken skin to reduce risk of infection.

Symptoms: drying effect on the skin

Eye contact

washed with running water.

Symptoms: discomfort

Immediate Medical Attention

Anyone who has asthmatic symptoms from an exposure to dust should seek medical advice. Medical advice should be sought if the discomfort persists.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Foam, Powder. Use Powder if there is an electrical risk or electrical fire when water and foam should not be used. Use Foam or Powder if burning liquids are involved.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Product spillage should be swept up, do not allow to enter drainage system, do not hose down.

Environmental

do not allow to enter drainage system

Cleanup methods

Vacuuming is the preferred method of cleaning. Product spillage should be swept up.

Materials: Brushes should preferably be of the type with coloured nylon bristles.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

All manual handling operations, including those involving bagged product, should be the subject of risk assessment appropriate to the environment and the physical characteristics of the handlers.

Storage

Bulk product should be stored in silos or flat stores with adequate ventilation in cool and dry conditions – preferably between 4°C and 25°C in ambient relative humidity, away from sudden extreme changes in temperature, out of direct sunlight and protected from the ingress of potential pests. Bagged product should be stored in cool and dry conditions – preferably between 4°C and 25°C in ambient relative humidity, away from sudden extreme changes in temperature.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

The data for this section has not been processed yet.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
---
Cloud Point
---
Flammability
flammable substance under the form of dust
State Under Standard Conditions
---
Colour Intensity
---
Physical State Data
solid
Relative Density
---
Metal Corrosion
---
Bulk Density
---
Auto Ignition Temperature
420 °C
Properties Status
---
Solubility In Water
---
Lower Explosive Limit
125 g/m³
Kinematic Viscosity
---
Explosive Limits
---
Decomposition Temperature
---
Solubility In Fat
---
Vapor Density
---
Flash Point
---
Freezing Point
---
Appearance
---
Partition Coefficient
---
Dynamic Viscosity
---
Form
dust
Melting Point
---
Vapor Pressure
---
Colour
---
Voc Content
---
Relative Evaporation Rate
---
Physical State
dust
Molecular Weight
---
Upper Explosive Limit
---
Softening Point
---
Ph
---
Odor Threshold
---
Density
---
Odor
---
Evaporation Rate
---
Solidification Point
---
Crystallisation Point
---
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Avoid

Potential sources of ignition should be avoided.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Further disposal according to national and local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The product is produced to comply with the prevailing requirements of the Food Safety Act and associated EU food regulations.

Chemical Safety Assessment Not performed

EH 40 Risk Phrases: none EH 40 Safety Phrases: none

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RICE EXTRUDED FLOUR?

The signal word is no signal word.

What is the physical form of RICE EXTRUDED FLOUR?

RICE EXTRUDED FLOUR is a dust .

What are the hazard statements for RICE EXTRUDED FLOUR?

This substance has 3 hazard statements:

  • Dust from extruded rice flour and derived products can provoke rhinitis and asthma.
  • In addition, this powder can have an irritating effect that can cause eye pain and dry skin.
  • Dust from extruded rice flour can be flammable, and under certain conditions can form explosive clouds.