NextSDS Logo
Safety Data Sheet EN

BOLERO BLOOM I.C (Version P3143)

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BOLERO BLOOM I.C (Version P3143)
Product Code
10079994

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

T

The Procter & Gamble Company

manufacturer

Cincinnati, Ohio 45242

Emergency Contacts

Chemtrec

800-424-9300

Chemtrec

703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of perfume raw materials.

Chemical Name CAS Number Concentration Hazardous
acétate de benzyle EC: 205-399-7 140-11-4 --- Yes

This perfume contains no chemicals at or above the threshold level subject to the reporting requirements of SARA Title III, Section 313.

Notes

One or more of the components present is greater than 1% concentration may cause the health effects described below. This mixture is considered hazardous per OSHA 29 CFR 1910.1200 due to health criteria.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air and encourage deep breathing. If symptoms persist, seek medical attention.

Skin contact

Rinse thoroughly with water. If irritation occurs and persists, report to the Medical Dept.

Symptoms: If irritation occurs and persists

Eye contact

Flush with water for 15 minutes and report to the Medical Department.

Ingestion

Drink large quantities of water and call a physician.

Immediate Medical Attention

Report to the Medical Department (for eye/skin if irritation occurs and persists). Seek medical attention (for inhalation if symptoms persist). Call a physician (for ingestion).

Medical Treatment

Report to the Medical Department. Seek medical attention. Call a physician.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation and/or local exhaust ventilation should be provided in areas where there is handling of perfumes in open systems (e.g., dispensing from drums). This applies to perfume compounding areas as well. Provide fire extinguishers, fire hoses and natural or forced air ventilation (at least 2 air changes per hour). Walls, floors, ceilings must have 2 hour fire rating. Outside walls must be noncombustible. See PSP #360, Process Safety Manual for fire protection requirements.

Hands

Use natural rubber gloves for direct contact.

Eyes

If splash potential exists, use chemical goggles.

Respiratory

Prolonged exposures to high vapor concentrations may require respiratory protection approved by NIOSH/MSHA for organic vapors. Individuals involved with odor evaluation tasks should breathe shallow/genfly in accordance with good odor evaluation techniques. This will serve to minimize exposure.

Skin/Body

Avoid unnecessary skin contact. Contaminated clothing and footwear should be removed and thoroughly cleaned before reuse. Use aprons for direct contact. Other items will be dictated by circumstances.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Bulk Density
---
Relative Evaporation Rate
---
Vapor Pressure
---
Physical State
Liquid
Solubility In Water
---
Molecular Weight
---
Solubility In Fat
---
Kinematic Viscosity
---
Ph
---
Boiling Point
---
Properties Status
---
Auto Ignition Temperature
---
Freezing Point
---
Melting Point
---
Decomposition Temperature
---
Vapor Density
---
Flash Point
---
Solubility
---
Colour Intensity
---
Lower Explosive Limit
---
Partition Coefficient
---
Dynamic Viscosity
---
Odor
Perfume
Upper Explosive Limit
---
Voc Content
---
Form
---
State Under Standard Conditions
---
Softening Point
---
Flammability
---
Odor Threshold
---
Density
---
Solidification Point
---
Metal Corrosion
---
Physical State Data
liquid
Crystallisation Point
---
Relative Density
---
Cloud Point
---
Evaporation Rate
---
Appearance
Liquid
Colour
Colorless to Amber
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BOLERO BLOOM I.C (Version P3143)?

The signal word is no signal word.

What is the physical form of BOLERO BLOOM I.C (Version P3143)?

BOLERO BLOOM I.C (Version P3143) is a liquid appearing as liquid with colorless to amber color. It has perfume odor.

Compliance Scan

Free compliance check