Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ford Semi-Gloss Black
- Product Code
- DE1635
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
THE SHERWIN-WILLIAMS CO.
manufacturer
DUPLI-COLOR Products Group Cleveland, OH 44115
(800) 247-3270
www.duplicolor.com
Emergency Contacts
Emergency Contact
(216) 566-2917
Emergency Contact
(800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propan EC: 200-827-9 | 74-98-6 | 15% | No |
| BUTANE/ISOBUTANE | 106-97-8 | 14% | No |
| Lt. Aliphatic Hydrocarbon Solvent EC: 265-192-2 | 64742-89-8 | 4% | No |
| toluwn EC: 203-625-9 | 108-88-3 | 19% | No |
| ACETONE EC: 200-662-2 | 67-64-1 | 30% | No |
| Ethyl 3-Ethoxypropionate EC: 212-112-9 | 763-69-9 | 2% | No |
| talc EC: 238-877-9 | 14807-96-6 | 2% | No |
| carbon black EC: 215-609-9 | 1333-86-4 | 1% | No |
| Chromium III (as Cr) | --- | 0.02% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If affected, remove from exposure. Restore breathing. Keep warm and quiet.
Wash affected area thoroughly with soap and water. Remove contaminated clothing and launder before re-use.
Flush eyes with large amounts of water for 15 minutes. Get medical attention.
Do not induce vomiting. Get medical attention immediately.
Immediate Medical Attention
Get medical attention immediately.
Related Substances
Similar chemicals with comparable safety profiles
MOTIP SEMI GLOSS BLACK 500 ML
---
SAS27 GLOSS BLACK SPRAY 500ML
---
GMF3041 GLIDDEN MAX-FLEX INTERIOR/EXTERIOR TOPCOAT MATTE CLEAR
---
SAS25 SATIN BLACK PAINT 500ML
---
Matt Black Paint
---
Simoniz VHT Black Paint/Enamel
---
MOTIP HIGH GLOSS BLACK 500 ML
---
PRO +LSPR 6PK GLOSS BLACK
---
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with adequate ventilation. Local exhaust preferable. General exhaust acceptable if the exposure to materials in Section 2 is maintained below applicable exposure limits. Refer to OSHA Standards 1910.94, 1910.107, 1910.108.
None required for normal application of aerosol products where minimal skin contact is expected. For long or repeated contact, wear chemical resistant gloves.
Wear safety spectacles with unperforated sideshields.
If personal exposure cannot be controlled below applicable limits by ventilation, wear a properly fitted organic vapor/particulate respirator approved by NIOSH/MSHA for protection against materials in Section 2. When sanding, wirebrushing, abrading, burning or welding the dried film, wear a particulate respirator approved by NIOSH/MSHA for protection against non-volatile materials in Section 2.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ford Semi-Gloss Black?
The signal word is no signal word.
What is the melting point of Ford Semi-Gloss Black?
The melting point is Not Available and the boiling point is <0 - 342 F <-18 - 172 C.