Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Ethylbenzene-d 10 commonly used laboratory chemicals, manufacture of substances.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapor.
- H304: May be fatal if swallowed and enters airways.
- H332: Harmful if inhaled.
- H373: May cause damage to organs (hearing organs) through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P273: Avoid release to the environment.
- IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell.
- P314: Get medical advice/ attention if you feel unwell.
- P331: Do NOT induce vomiting.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Merck Life Science BV/SRL
national supplier
Brusselsesteenweg 288 B-3090 OVERIJSE
BE
+32 (0)3 899-1301
+32 (0)3 899-1311
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
+(32) 28 083237
BE
Anti-poison centre
070 245245
BE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
SubstancesChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (2H10)ethylbenzene EC: 247-292-8 | 25837-05-2 | 100% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
Symptoms:
If breathing stops
🖐️ Skin Contact
Take off immediately all contaminated clothing. Rinse skin with water/ shower. Consult a physician.
👁️ Eye Contact
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
🍽️ Ingestion/Swallowing
Caution if victim vomits. Keep airways free. Call a physician immediately.
Symptoms:
Risk of aspiration! Pulmonary failure possible after aspiration of vomit.
🚨 Immediate Medical Attention Required
No data available
Medical Treatment
No data available
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Full contact: Material: Viton, Minimum layer thickness: 0,7 mm, Break through time: 480 min. Material tested: Vitoject (KCL 890 / Aldrich Z677698, Size M). Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0,4 mm, Break through time: 10 min. Material tested: Camatril (KCL 730 / Aldrich Z677442, Size M). When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves.
👁️ Eye Protection
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
😷 Respiratory Protection
Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds. The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
🦺 Skin/Body Protection
Flame retardant antistatic protective clothing.
🌍 Environmental Exposure Controls
Do not let product enter drains. Risk of explosion.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1175
📦 Proper Shipping Name
ETHYLBENZENE
⚠️ Transport Hazard Class
3
📋 Packing Group
II
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Ethylbenzene-d 10?
The signal word for this substance is "danger".
What is the physical form of Ethylbenzene-d 10?
Ethylbenzene-d 10 is a liquid with no data available color. It has no data available odor.
What is Ethylbenzene-d 10 used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Ethylbenzene-d 10?
This substance has 5 hazard statements: H225: Highly flammable liquid and vapor. H304: May be fatal if swallowed and enters airways. H332: Harmful if inhaled. H373: May cause damage to organs (hearing organs) through prolonged or repeated exposure. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Ethylbenzene-d 10?
The melting point is -95 C - lit. and the boiling point is 134,6 C - lit..