Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- mixture of isomers
- Product Code
- 370932
- Chemical Name
- acrylzuur, monoester met propaan-1,2-diol
Regulatory Identifiers
- CAS Number
- 25584-83-2 Check regulations →
- EC Number
- 247-118-0 Check regulations →
- REACH No.
- 01-2119459351-41
Identified Uses
Laboratory chemicals, Synthesis of substances
Uses advised against
The product is being supplied under the TSCA R&D Exemption (40 CFR Section 720.36). It is the recipient’s responsibility to comply with the requirements of the R&D exemption. The product may not be used for a non-exempt commercial purpose under TSCA unless appropriate consent is granted in writing by MilliporeSigma.
Manufacturers & Suppliers
Sigma-Aldrich Inc.
global supplier
3050 SPRUCE ST ST. LOUIS MO 63103 UNITED STATES
+1 314 771-5765
Emergency Contacts
CHEMTREC
800-424-9300
24 Hours/day; 7 Days/week
CHEMTREC
+1-703-527-3887
24 Hours/day; 7 Days/week
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydroxypropyl acrylate, mixture of isomers EC: 247-118-0 | 25584-83-2 | 100% | Yes |
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon oxides Combustible.
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
No data available
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Full contact Material: Chloroprene Minimum layer thickness: 0.6 mm Break through time: 480 min Material tested:Camapren® (KCL 722 / Aldrich Z677493, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0.4 mm Break through time: 30 min Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374. If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Strong oxidizing agents
In the event of fire: see section 5
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- Corrosive liquids, toxic, n.o.s. (Hydroxypropyl acrylate, mixture of isomers)
- Transport Class
- 8 (6.1)
- Packing Group
- II
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for mixture of isomers?
The signal word is danger.
What is the physical form of mixture of isomers?
mixture of isomers is a liquid with colorless color. It has like acrylic odor.
What is mixture of isomers used for?
Laboratory chemicals, Synthesis of substances
What are the hazard statements for mixture of isomers?
This substance has 5 hazard statements:
- H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H401: Toxic to aquatic life.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of mixture of isomers?
The melting point is -30 °C (-22 °F) and the boiling point is 77 °C 171 °F.