Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- A14
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional use only.
Manufacturers & Suppliers
Ecover Belgium NV
manufacturer
Industrieweg 3 2390 Malle Belgium
+32 (0)3 309 25 00
Emergency Contacts
Antipoison Centre Belgium
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium hydroxide EC: 215-185-5 | 1310-73-2 | 10% | Yes |
| Alkyl Poly Glycoside C8-10 | 68515-73-1 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, rest in half sitting position. Seek medical advice.
Symptoms: Corrosive. Sore throat. Cough. Shortness of breath. May cause inflammation of the respiratory system (pulmonary oedema).
Rinse affected area thoroughly with water to remove concentrated product. Remove contaminated clothing. Seek medical attention immediately.
Symptoms: Corrosive. Causes severe burns.
Rinse immediately and for at least 15 minutes with copious amounts of water (also assure adequate flushing under the eyelids and if possible after having removed contact lenses). Bring the victim to an ophthalmist.
Symptoms: Irritation to eyes. Corrosion, redness, pain. Vapours may be irritating to eyes and may cause corneal damage.
Wash out mouth and do not induce vomiting. Seek medical attention.
Symptoms: Corrosive. Diarrhea. Vomiting. Cramps.
Immediate Medical Attention
Seek medical advice (inhalation), seek medical attention immediately (skin), bring the victim to an ophthalmist (eyes), seek medical attention (ingestion).
Medical Treatment
Consider to administer a cortisone spray in advance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All extinguishing media can be used.
None.
Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Spill area may be slippery. Avoid contact with skin, eyes and clothes.
Avoid release to the environment.
Spilled product must be collected with sand or an inert absorbent material and dispose of as chemical waste. Rinse away remainder with water.
Materials: sand or an inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothes.
Store in a cool and frost-free place
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No decomposition under normal conditions of storage and use.
No data available.
Do not store <0°C and >40°C.
Acids, PET
Ammonium is released under the influence of ammonium salts. Aluminium and zinc are dissolved slowly under formation of hydrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S.
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for A14?
The signal word is na: r-phrases.
What is the physical form of A14?
A14 is a liquid appearing as liquid. brown. with brown. color. It has not perfumed. odor.
What is the solubility of A14?
Complete.
What is A14 used for?
For professional use only.
What is the melting point of A14?
The melting point is No data available. and the boiling point is No data available..