NextSDS Logo
Kl

Klberoil 4 UH1-1500 N Spray

DANGER aerosol SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Klberoil 4 UH1-1500 N Spray
Product Code
081263

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Lubricant spray
Uses Advised Against
Restricted to professional users.

Overview

Klberoil 4 UH1-1500 N Spray commonly used lubricant spray.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Aerosol Category 1 H222
Aerosol Category 1 H229

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

Precautionary Statements

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • Protect from sunlight. Do not expose to temperatures exceeding 50 / 122 F.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Klber Lubrication Mnchen GmbH & Co. KG

manufacturer

๐Ÿ“

Geisenhausenerstr. 7 81379 Mnchen Deutschland

๐ŸŒ

DE

๐Ÿ“ž

+49 (0) 89 7876 0

๐Ÿ“ 

+49 (0) 89 7876 333

Klber Lubrication Deutschland GmbH & Co. KG

national supplier

๐Ÿ“

Geisenhausenerstrae 7 81379 Mnchen Deutschland

๐ŸŒ

DE

๐Ÿ“ž

+49 (0) 89 7876 0

๐Ÿ“ 

+49 (0) 89 7876 565

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+49 89 7876 700

๐ŸŒ

DE

๐Ÿ•’

24 hrs

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Propellant Synthetic hydrocarbon oil ester oil

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
isobutane
EC: 200-857-2
75-28-5 50-70% โš ๏ธ Hazardous
propane
EC: 200-827-9
74-98-6 1-10% โš ๏ธ Hazardous
butane
EC: 203-448-7
106-97-8 1-10% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Remove person to fresh air. If breathing is irregular or stopped, administer artificial respira- tion.

Symptoms:

Unconsciousness, Dizziness, Drowsiness, Headache, Nausea, Tiredness

๐Ÿ–๏ธ Skin Contact

Remove contaminated clothing. Wash off with soap and plenty of water. Wash clothing before reuse. Thoroughly clean shoes before reuse.

๐Ÿ‘๏ธ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

๐Ÿฝ๏ธ Ingestion/Swallowing

Move the victim to fresh air. Keep respiratory tract clear. Do NOT induce vomiting. Rinse mouth with water.

๐Ÿšจ Immediate Medical Attention Required

If eye irritation persists, consult a specialist. If skin irritation develops, get medical attention.

Medical Treatment

Treat symptomatically.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
aerosol
Critical Property
๐Ÿ“Š Physical State Data
aerosol
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
yellow
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
characteristic
๐Ÿ“Š Odor Threshold
No data available
๐Ÿงช Ph
Not applicable substance/mixture is non-soluble (in water)
๐ŸงŠ Melting Point
No data available
Critical Property
๐Ÿ’จ Boiling Point
No data available
Critical Property
๐Ÿ”ฅ Flash Point
-80 Method: ISO 2592, closed cup
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
No data available
๐Ÿ’จ Vapor Pressure
2.700 hPa (20 )
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
0,60 (20 ) Reference substance: Water The value is calculated
๐Ÿ“Š Bulk Density
No data available
โš–๏ธ Density
0,60 g/cm3 (20 )
Critical Property
๐Ÿ”ฅ Flammability
Extremely flammable aerosol.
๐Ÿ“Š Upper Explosive Limit
11,2 %(V)
๐Ÿ“Š Lower Explosive Limit
1,5 %(V)
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
> 350
๐Ÿ“Š Decomposition Temperature
No data available
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
No data available
๐Ÿ“Š Solubility In Water
< 0,1 g/l insoluble
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
No data available
๐Ÿ“Š Kinematic Viscosity
No data available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Use only in an area equipped with explosion proof exhaust ventilation. Handle only in a place equipped with local exhaust (or other appropriate exhaust).

๐Ÿงค Hand Protection

Material : Nitrile rubber : > 10 min : Class 1 : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifica- tions of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

๐Ÿ‘๏ธ Eye Protection

Safety glasses with side-shields

๐Ÿ˜ท Respiratory Protection

Use respiratory protection unless adequate local exhaust ven- tilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Short term only Filter type : Filter type A-P

๐Ÿฆบ Skin/Body Protection

Choose body protection in relation to its type, to the concen- tration and amount of dangerous substances, and to the spe- cific work-place.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN 1950

๐Ÿ“ฆ Proper Shipping Name

AEROSOLS

โš ๏ธ Transport Hazard Class

2.1

๐Ÿ“‹ Packing Group

Not assigned by regulation

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Klberoil 4 UH1-1500 N Spray?

The signal word for this substance is "danger".

What is the physical form of Klberoil 4 UH1-1500 N Spray?

Klberoil 4 UH1-1500 N Spray is a aerosol with yellow color. It has characteristic odor.

What is Klberoil 4 UH1-1500 N Spray used for?

Lubricant spray

What are the hazard statements for Klberoil 4 UH1-1500 N Spray?

This substance has 2 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated.

What is the melting point of Klberoil 4 UH1-1500 N Spray?

The melting point is No data available and the boiling point is No data available.