NextSDS Logo
NW

NWT Cleanspray

DANGER Aerosol SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
NWT Cleanspray

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Instrument care spray

Overview

NWT Cleanspray commonly used instrument care spray.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Aerosol Category 1

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

Precautionary Statements

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 /122 F.
  • P501: Dispose of contents/container to approved disposal company or local collection.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

NWT GmbH company logo - Safety Data Sheet supplier organization

NWT GmbH

undefined

๐Ÿ“

Am Obstgut 9 04425 Taucha / DEUTSCHLAND

๐ŸŒ

DE

๐Ÿ“ž

+49 (0) 34298 1412-0

๐Ÿ“ 

+49 (0) 34298 1412-28

๐ŸŒ www.nskwt.com

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

GBK GmbH

๐Ÿ“ž

+49 - (0) 6132 - 84463

๐ŸŒ

DE

๐Ÿ•’

24h - 7d/w - 365d/a

๐Ÿ’ก

INTERNATIONAL

NHS

๐Ÿ“ž

111

๐ŸŒ

GB

๐Ÿ’ก

In England and Wales

NHS 24

๐Ÿ“ž

111

๐ŸŒ

GB

๐Ÿ’ก

In Scotland

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Mixtures

General Composition

Propellant: propane/butan Aerosol with preparation of special oil

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Butane
EC: 203-448-7
106-97-8 50% โš ๏ธ Hazardous
Propane
EC: 200-827-9
74-98-6 30% โš ๏ธ Hazardous
Isobutane
EC: 200-857-2
75-28-5 15% โš ๏ธ Hazardous
White mineral oil
EC: 232-315-6
8042-47-5 15% โš ๏ธ Hazardous
Isopentane
EC: 201-142-8
78-78-4 1% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Move to fresh air in case of accidental inhalation of vapours. If you feel unwell, seek medical advice.

Symptoms:

Inhalation of high vapour concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting. Inhalation of vapours in high concentration can cause narcotic effects.

๐Ÿ–๏ธ Skin Contact

Wash off with soap and plenty of water. Consult a doctor if skin irritation persists.

Symptoms:

Contact with eyes or skin may cause irritation. Rapid evaporation of the liquid may cause frostbite.

๐Ÿ‘๏ธ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.

Symptoms:

Contact with eyes or skin may cause irritation.

๐Ÿฝ๏ธ Ingestion/Swallowing

Do not induce vomiting. Summon a doctor immediately. Induce vomiting only upon the advice of a physician.

Medical Treatment

Treat symptoms.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Relative Density
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ’จ Vapor Pressure
approx. 4400 hPa *)
๐Ÿ“Š Solidification Point
Not available
๐Ÿงช Ph
Not available
๐Ÿ“Š Bulk Density
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐ŸงŠ Melting Point
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ‘ƒ Odor
Mild
๐Ÿ“Š Partition Coefficient
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Odor Threshold
Not available
๐Ÿ”ฅ Flash Point
approx. - 80 *)
Critical Property
๐Ÿงช Physical State
Aerosol
Critical Property
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐ŸŽจ Colour
Colourless
๐Ÿ“Š Upper Explosive Limit
9,5 vol. % *)
๐Ÿ“Š Solubility In Water
< 0,1 g/L
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Form
Not available
โš–๏ธ Density
0,86 g/cm3
Critical Property
๐Ÿ“Š Auto Ignition Temperature
approx. 400 C *)
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Lower Explosive Limit
1,5 vol. % *)
๐Ÿ’จ Boiling Point
Not available
๐Ÿ“Š Properties Status
Not available
๐Ÿ”ฅ Flammability
Not available
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Physical State Data
aerosol
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ“Š Colour Intensity
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Ensure adequate ventilation, especially in confined areas.

๐Ÿงค Hand Protection

Not required under normal use.

๐Ÿ‘๏ธ Eye Protection

Safety goggles with side protection (EN 166).

๐Ÿ˜ท Respiratory Protection

No personal respiratory protective equipment normally required. In case of insufficient ventilation wear suitable respiratory equipment (gas filter type AX) (EN 14387).

๐Ÿฆบ Skin/Body Protection

Long sleeved clothing (DIN EN ISO 6530)

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN 1950

๐Ÿ“ฆ Proper Shipping Name

AEROSOLS

โš ๏ธ Transport Hazard Class

2.1

๐Ÿš› ADR Transport Precautions

Take the usual precautions when handling with chemicals.

๐Ÿšข IMDG Maritime Transport Precautions

Take the usual precautions when handling with chemicals.

โœˆ๏ธ IATA Air Transport Precautions

Take the usual precautions when handling with chemicals.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for NWT Cleanspray?

The signal word for this substance is "danger".

What is the physical form of NWT Cleanspray?

NWT Cleanspray is a aerosol with colourless color. It has mild odor.

What is NWT Cleanspray used for?

Instrument care spray

What are the hazard statements for NWT Cleanspray?

This substance has 2 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated.