Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
European Community number - used for regulatory compliance in EU/EEA
Uses Information
Overview
anhydrous (CAS: 110-85-0 ) is a crystalline powder or flakes substance commonly used su24 scientific research and development.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS08
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H361: Suspected of damaging fertility or the unborn child.
Precautionary Statements
- P260: Do not breathe dusts or mists.
- P284: [In case of inadequate ventilation] wear respiratory protection.
- P303+P361+P353: If on skin (or hair): Take off immediately all' contaminated clothing. Rinse skin with water/shower.
- P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.
manufacturer
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
800-343-0660
US
Monday-Friday, 8am-7pm EST
Carechem 24
866-928-0789
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceGeneral Composition
Chemical characterization: Substances
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| piperazine [liquid] [solid] 612-057-00-4; 612-057-01-1 EC: 203-808-3 | 110-85-0 | 100% | Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Symptoms:
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin Contact
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Symptoms:
Causes severe skin burns.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Ingestion/Swallowing
Seek medical treatment.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Hand Protection
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined
Eye Protection
Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU)
Respiratory Protection
Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.
Skin/Body Protection
Protective work clothing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
UN Number
UN2579
Proper Shipping Name
Piperazine
Transport Hazard Class
8
Packing Group
III
IMDG Maritime Transport Precautions
F-A,S-B
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for anhydrous?
The signal word for this substance is "danger".
What is the physical form of anhydrous?
anhydrous is a crystalline powder or flakes appearing as crystalline powder or flakes . It has not determined odor.
What is anhydrous used for?
SU24 Scientific research and development
What are the hazard statements for anhydrous?
This substance has 4 hazard statements: H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled. H361: Suspected of damaging fertility or the unborn child.
What is the melting point of anhydrous?
The melting point is 108-113 °C (226-235 °F) and the boiling point is 146-148 ℃ (295-298 °F).