NextSDS Logo
Safety Data Sheet EN

Sulphuric Acid 51 - 99%

CAS 540-84-1
EC 208-759-1

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sulphuric Acid 51 - 99%
Product Code
22901
Chemical Name
iso-Octaan
Synonyms
Isooctane

Regulatory Identifiers

CAS Number
540-84-1 Check regulations →
EC Number
208-759-1 Check regulations →
REACH No.
01-2119457965-22-0002

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Asp. Tox. Cat. 1 H304
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor/.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
iso-Octaan EC: 208-759-1 540-84-1 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) Not determined.

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with organic vapor/acid gas cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility
Not miscible or difficult to mix
Solubility In Water
Not miscible or difficult to mix
Vapor Density
Not determined.
Appearance
Colorless
Partition Coefficient
4.6 log POW
Melting Point
-107 °℃ (-161 ºF)
Ph
Not determined.
Density
0.692 g/cm3 (5.775 lbs/gal)
Physical State Data
liquid
Freezing Point
---
Softening Point
---
Colour
Colorless
Dynamic Viscosity
0.51 mPas
State Under Standard Conditions
---
Auto Ignition Temperature
410 °C (770 °F)
Cloud Point
---
Crystallisation Point
---
Decomposition Temperature
Not determined.
Boiling Point
98-99 ℃ (208-210 °F)
Upper Explosive Limit
6 Vol %
Molecular Weight
---
Solubility In Fat
---
Evaporation Rate
Not determined.
Kinematic Viscosity
Not determined.
Flammability
Not determined.
Solidification Point
---
Odor Threshold
Not determined.
Metal Corrosion
---
Voc Content
---
Physical State
Liquid
Form
Liquid
Odor
Nearly odorless
Colour Intensity
---
Relative Evaporation Rate
---
Lower Explosive Limit
1.1 Vol %
Relative Density
Not determined.
Vapor Pressure
15 hPa (11 mm Hg)
Flash Point
-7 °℃ (19 ºF)
Bulk Density
---
Properties Status
---
Explosive Limits
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1262
Shipping Name
Octanes
Transport Class
3
Packing Group
II
IMDG

Warning: Flammable liquids

IATA

Warning: Flammable liquids

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Sulphuric Acid 51 - 99% known by?

Sulphuric Acid 51 - 99% is also known as: Isooctane

What is the hazard signal word for Sulphuric Acid 51 - 99%?

The signal word is danger.

What is the physical form of Sulphuric Acid 51 - 99%?

Sulphuric Acid 51 - 99% is a liquid appearing as colorless with colorless color. It has nearly odorless odor.

What is the solubility of Sulphuric Acid 51 - 99%?

Not miscible or difficult to mix

What is Sulphuric Acid 51 - 99% used for?

SU24 Scientific research and development

What are the hazard statements for Sulphuric Acid 51 - 99%?

This substance has 4 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H315: Causes skin irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of Sulphuric Acid 51 - 99%?

The melting point is -107 °℃ (-161 ºF) and the boiling point is 98-99 ℃ (208-210 °F).

Compliance Scan

Free compliance check