Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Holland Dental Rapid Simplified is a clear. colourless. substance commonly used professional use: manufacturing of dental applications..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280: Wear protective gloves.
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
- P370+P378: In case of fire: Use foam, dry extinguishing powder, carbon dioxide (CO2) to extinguish.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Vertex-Dental
manufacturer
Centurionbaan 190, 3769 AV Soesterberg, The Netherlands
NL
+31 886160400
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
GB
Only for healthcare professionals
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Contains various chemical components including methyl methacrylate and 2-Propenoic acid derivatives.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| methyl methacrylate; methyl 2-methylprop-2-enoate; methyl 2-methylpropenoate EC: 201-297-1 | 80-62-6 | 75% | ⚠️ Hazardous |
| substance with national workplace exposure limit(s) (GB); substance with a Community workplace exposure limit | N/A | Not specified | ⚠️ Hazardous |
| 2-Propenoic acid, 2-methyl-, 1,2-ethanediyl ester EC: 202-617-2 | 97-90-5 | 1-5% | ⚠️ Hazardous |
Composition Notes
Certain substances are listed in a stabilised form.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.
Symptoms:
May cause respiratory irritation.
🖐️ Skin Contact
Rinse skin with water/shower. Take off immediately all contaminated clothing. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Symptoms:
Irritation. May cause an allergic skin reaction. Causes skin irritation.
👁️ Eye Contact
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms:
Pain, blinking or redness persists.
🍽️ Ingestion/Swallowing
Call a poison center or a doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure good ventilation of the work station.
🧤 Hand Protection
Wear suitable gloves tested to EN374. Recommendation: Wear suitable gloves resistant to chemical penetration. Choosing the proper glove is a decision that depends not only on the type of material, but also on other quality features, which differ for each manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Gloves must be replaced after each use and whenever signs of wear or perforation appear. Suitable material: butyl rubber. Layer thickness : 0.3 mm. penetration time (maximum wearing period): 60 min. If there is a risk of liquid being splashed : Nitrile rubber gloves Incidental. Thickness of glove material: 0.11 mm
👁️ Eye Protection
Wear eye glasses with side protection according to EN 166.
😷 Respiratory Protection
No respiratory protection needed under normal use conditions. When exposure limit values are exceeded: use respirators with filtertype A (organic gases ans vapours). Use half masks (approved to EN 405) of full face masks (approved to EN 136).
🦺 Skin/Body Protection
Wear suitable protective clothing. Standard. EN 13034
🌍 Environmental Exposure Controls
Avoid release to the environment.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 1247
📦 Proper Shipping Name
METHYL METHACRYLATE MONOMER, STABILIZED
⚠️ Transport Hazard Class
3
📋 Packing Group
II
🚛 ADR Transport Precautions
F1
🚢 IMDG Maritime Transport Precautions
386
✈️ IATA Air Transport Precautions
A209
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Holland Dental Rapid Simplified?
The signal word for this substance is "danger".
What is the physical form of Holland Dental Rapid Simplified?
Holland Dental Rapid Simplified is a liquid appearing as clear. colourless. with colourless. color. It has ester. strong. acid. characteristic. odor.
What is the solubility of Holland Dental Rapid Simplified?
Water: 1.6 % slightly soluble Organic solvent:Dispersible
What is Holland Dental Rapid Simplified used for?
Professional use: Manufacturing of dental applications.
What are the hazard statements for Holland Dental Rapid Simplified?
This substance has 4 hazard statements: H225: Highly flammable liquid and vapour. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H335: May cause respiratory irritation.
What is the melting point of Holland Dental Rapid Simplified?
The melting point is - 48 ℃ and the boiling point is 100.5 ℃.