Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
NextDent [TM ] C&B is a nextdent [tm] base pink, nextdent [tm] sg translucent orange, nextdent [tm] ortho rigid transparent blue, nextdent [tm] tray blue or pink, nextdent [tm] c&b tooth coloured substance commonly used base: monomer based on acrylic esters for manufacturing of 3d-printed denture bases. sg: monomer based on acrylic esters for manufacturing of 3d-printed surgical guides. ortho rigid: monomer based on acrylic esters for manufacturing of 3d-printed dental splints. tray: monomer based on acrylic esters for manufacturing of 3d-printed individually impression trays. c&b: monomer based on acrylic esters for manufacturing of 3d-printed crowns and bridges..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H317: May cause an allergic skin reaction.
- H413: May cause long-lasting harmful effects to aquatic life.
Precautionary Statements
- P261: Avoid breathing dust/fumes/gas/mist/vapours/spray.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P302+P352: IF ON SKIN: Wash with plenty of soap and water.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do continue rinsing.
- P333+P313: If skin irritation or a rash occurs: Get medical advice/attention.
- P362+P364: Take off contaminated clothing and wash it before reuse.
- P501: Dispose of contents/container in accordance with local/regional/national/ international regulation.
Manufacturers & Suppliers
Authorized suppliers, manufacturers, and distribution network information
Vertex-Dental B.V.
manufacturer
24/7 Emergency Response
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+31 88 616 04 40
NL
only available during office hours
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Substances in the product which may present a health or environmental hazard, or which have been assigned occupational exposure limits, are detailed below. According to Regulation (EG) Nr. 1272/2008 [CLP].
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethoxylated Bisphenol A EC: 609-946-4 | N/A | 60% | Hazardous |
| Methacrylic oligomer | N/A | 15-25% | Hazardous |
| Phosphine oxide EC: 423-340-5 | N/A | 2.5% | Hazardous |
| Phenylphophinate EC: 282-810-6 | N/A | 2.5% | Hazardous |
Composition Notes
For full text of H phrases see section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
Inhalation Exposure
Move into fresh air and keep at rest. Get medical attention if any discomfort continues.
Skin Contact
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention promptly if irritation or other symptoms occur after washing.
Eye Contact
Continue to rinse for at least 15 minutes under running water with eyelids held open. Get medical attention if any discomfort continues.
Ingestion/Swallowing
Do not induce vomiting. Immediately rinse mouth and drink plenty of water. Get medical attention if any discomfort continues
Immediate Medical Attention Required
Note to physician. Treat according to symptoms (decontamination, vital functions).
Medical Treatment
Treat according to symptoms (decontamination, vital functions).
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment
Occupational exposure limits, engineering controls, and required safety equipment
Engineering Controls
Provide adequate ventilation, including appropriate local extraction, to ensure that the defined occupational exposure limit is not exceeded.
Hand Protection
Wear suitable gloves. Butyl and nitrile rubber gloves offer short-term protection. Gloves should be stored correctly and changed regularly, especially if excessive exposure has occurred.
Eye Protection
Wear eye/face protection. Wear approved chemical safety goggles where eyes exposure must be provided.
Respiratory Protection
Wear suitable respiratory protective equipment if engineering controls are insufficient, or not present, and exposure to levels above the DNEL is likely. A suitable mask with filter type P2 may be appropriate.
Skin/Body Protection
Keep working clothes separately. Take off contaminated clothing immediately. Wash soiled clothing before reuse.
Environmental Exposure Controls
Ensure effective control measures when working within the boundaries as specified in section 6.2 of each GES.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for NextDent [TM ] C&B?
The signal word for this substance is "warning".
What is the solubility of NextDent [TM ] C&B?
Good solubility with most organic solvents
What is NextDent [TM ] C&B used for?
Base: Monomer based on acrylic esters for manufacturing of 3D-printed denture bases. SG: Monomer based on acrylic esters for manufacturing of 3D-printed surgical guides. Ortho Rigid: Monomer based on acrylic esters for manufacturing of 3D-printed dental splints. Tray: Monomer based on acrylic esters for manufacturing of 3D-printed individually impression trays. C&B: Monomer based on acrylic esters for manufacturing of 3D-printed crowns and bridges.
What are the hazard statements for NextDent [TM ] C&B?
This substance has 2 hazard statements: H317: May cause an allergic skin reaction. H413: May cause long-lasting harmful effects to aquatic life.
What is the melting point of NextDent [TM ] C&B?
The melting point is Not applicable and the boiling point is - 200C.