Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Maldex G Series
- Product Form
- Substance
- Chemical Name
- Maltodextrin
Regulatory Identifiers
- CAS Number
- 9050-36-6 Check regulations →
- EC Number
- 232-940-4 Check regulations →
Identified Uses
Food-stuff industry, Animal feed, Cosmetics, Raw material for chemistry, Industrial
Manufacturers & Suppliers
Tereos Starch & Sweeteners Belgium NV
undefined
Burchtstraat 10 9300 AALST - Belgium
+32 53 73 33 33
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 1 809 2566
24/7
National Poisons Information Centre Beaumont Hospital
+353 1 809 2166
8am - 10pm, 7/7
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
NHS 111/NHS 24/NHS Direct
111
NHS 111/NHS 24/NHS Direct
0845 4647
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Maltodextrin EC: 232-940-4 | 9050-36-6 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person away from the contaminated area and into the fresh air. If you feel unwell, seek medical advice.
Symptoms: Dust from this product may cause irritation to the respiratory tract.
Wash with soapy water. In case of redness or irritation, call a doctor.
Symptoms: Dust from this product may cause skin irritation.
Immediately flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, consult an eye specialist.
Symptoms: Dust may cause slight irritation to the ocular mucous membranes due to mechanical action.
Rinse mouth out with water. If you feel unwell, seek medical advice.
Symptoms: May cause irritation to the digestive tract.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention. In case of redness or irritation (skin), call a doctor. If irritation persists (eyes), consult an eye specialist. If you feel unwell (inhalation/ingestion), seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Foam. Carbon dioxide (CO2). Dry chemical.
Dust may form explosive mixture in air.
Do not dispose of fire-fighting water in the environment. Cool down the containers exposed to heat with a water spray.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid raising powdered material due to explosion hazard. Avoid contact with skin and eyes. Do not breathe dust. Ventilate spillage area.
Avoid release to the environment.
Wash contaminated area with large amounts of water.
Materials: large amounts of water
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Material can accumulate some static charge during transfer. Prevent build-up of electrostatic charges (e.g, by grounding). Provide adequate ventilation to minimize dust concentrations. Do not breathe dust. Avoid the formation or spread of dust in the atmosphere. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Store in dry, cool, well-ventilated area. Protect from moisture. Keep the container hermetically sealed.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station. Extraction to remove dust at its source.
Protective gloves. The protective gloves to be used must comply with the specifications of the regulation 2016/425 and the resultant standard EN 374
Safety glasses with side shields
Effective dust mask
Protective clothing. Wear suitable coveralls to prevent exposure to the skin
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
To our knowledge, the product does not present any particular risk, under normal conditions of use.
Dust explosion hazard in air.
Avoid dust production. Keep away from heat and direct sunlight. Ignition sources.
Strong acids. Strong alkalis. Oxidation agents. Reducing agents.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not discharge the product into the environment. Dispose in a safe manner in accordance with local/national regulations.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not regulated
- Transport Class
- Not regulated
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Maldex G Series?
The signal word is no signal word.
What is the physical form of Maldex G Series?
Maldex G Series is a solid appearing as powder. with white to off-white. color. It has odourless. slightly acidic. odor.
What is the solubility of Maldex G Series?
Soluble in water. Very soluble when hot.
What is Maldex G Series used for?
Food-stuff industry, Animal feed, Cosmetics, Raw material for chemistry, Industrial
What is the melting point of Maldex G Series?
The melting point is Not available and the boiling point is Not available.