NextSDS Logo
Safety Data Sheet EN

Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices
Product Code
CA2C200

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Disinfection of non-invasive medical devices

Manufacturers & Suppliers

G

GAMA Healthcare Ltd

undefined

Unit 2, The Exchange Brent Cross Gardens London NW4 3RJ United Kingdom

+44 (0) 845 2011 644

Emergency Contacts

Emergency Contact

+44 (0) 207 9930 035

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2 H319
Eye Dam. Cat. 1 H318
STOT SE Cat. 3 H336
Aquatic Acute Cat. 1 H400

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour

Precautionary Statements

Keep away from heat/sparks/open flames/hot surfaces
Avoid breathing vapours
IF IN EYES: Rinse with water for 15 minutes. Seek prompt medical attention for signs of irritation.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Propan-2-ol EC: 200-661-7 67-63-0 68 - 75% Yes
Chlorhexidine digluconate EC: 242-354-0 18472-51-0 2 - 2.5% Yes
Water --- 22.5 - 30% No

Notes

For the full test of all R-Phrases and Hazard Statements are available in Section 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If adverse effects (eg irritation of the airways, drowsiness, or dizziness) occur, remove patient from exposure and give fresh air and rest. Obtain prompt medical attention.

Symptoms: irritation of the airways, drowsiness, or dizziness

Skin contact

For industrial use of the liquid, remove contaminated clothing and wash affected area with soap and water. If irritation occurs, seek medical attention. Launder contaminated clothing before re-use.

Symptoms: irritation

Eye contact

In case of contact with eyes, irrigate with water for 15 minutes, occasionally lifting eyelids. Seek prompt medical attention for signs of irritation.

Symptoms: signs of irritation, eye damage

Ingestion

For industrial use of the liquid, if swallowed, wash out mouth thoroughly and give water to drink. Seek medical attention if significant amounts (eg more than a teaspoonful) are ingested, or for any symptoms occurring after ingestion. Do not induce vomiting, unless instructed by medical personnel.

Immediate Medical Attention

Obtain prompt medical attention for adverse effects, irritation, or if significant amounts are ingested. Treat symptoms as they occur.

Medical Treatment

Treat symptoms as they occur.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

For industrial use of the liquid, good general ventilation is recommended. Where exposure limits may be exceeded, local exhaust ventilation may be necessary.

Hands

Prevent skin contact by wearing chemical resistant gloves (eg rubber, neoprene, PVC). Consult manufacturers concerning breakthrough times. PPE should be to European (EN) standards.

Eyes

Prevent eye contact by wearing safety goggles. PPE should be to European (EN) standards.

Skin/Body

Where more extensive contact may occur, wear suitable protective clothing (eg apron, sleeves, boots). PPE should be to European (EN) standards.

Environmental

Not available

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Odor Threshold
Not available
Boiling Point
82 to 83°C (propan-2-ol)
Dynamic Viscosity
---
Flammability
---
Voc Content
---
Cloud Point
---
Colour Intensity
---
Crystallisation Point
---
Physical State
Moist non-woven wipe
Melting Point
-88 to -90°C (propan-2-ol)
Solubility
Soluble in water
Solubility In Water
Soluble in water
Partition Coefficient
Not available
Solubility In Fat
---
Vapor Density
---
Evaporation Rate
Not available
Lower Explosive Limit
1.8%
Form
---
Odor
Alcohol
Relative Evaporation Rate
---
Solidification Point
---
Vapor Pressure
4.3 kPa (propan-2-ol)
Softening Point
---
Decomposition Temperature
Not available
Relative Density
---
Appearance
Moist non-woven wipe
Metal Corrosion
---
Kinematic Viscosity
---
Freezing Point
-88 to -90°C (propan-2-ol)
Explosive Limits
---
Molecular Weight
---
Bulk Density
---
State Under Standard Conditions
---
Colour
---
Auto Ignition Temperature
Not available
Density
---
Flash Point
ca. 18°C (70% propan-2-ol)
Upper Explosive Limit
12%
Ph
5.0-8.0
Physical State Data
solid
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3175
Shipping Name
SOLIDS CONTAINING FLAMMABLE LIQUID, N.O.S (contains isopropanol)
Transport Class
4.1
Packing Group
II
ADR

Not available

IMDG

Not available

IATA

Not available

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices?

The signal word is danger.

What is the physical form of Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices?

Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices is a moist non-woven wipe appearing as moist non-woven wipe . It has alcohol odor.

What is the solubility of Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices?

Soluble in water

What is Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices used for?

Disinfection of non-invasive medical devices

What are the hazard statements for Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices?

This substance has 1 hazard statement:

  • H225: Highly flammable liquid and vapour

What is the melting point of Clinell Alcoholic 2% Chlorhexidine Wipes for Medical Devices?

The melting point is -88 to -90°C (propan-2-ol) and the boiling point is 82 to 83°C (propan-2-ol).

Compliance Scan

Free compliance check