Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Eisen(III)-chloridlösung 40% FeCl3 technisch
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals, Industrial uses: Uses of substances as such or in preparations at industrial sites, Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
Uses advised against
Do not use for private purposes (household).
Manufacturers & Suppliers
Fa. Bernd Kraft GmbH
manufacturer
Stempelstraße 6, D-47167 Duisburg
0203/5194-0
http://www.berndkraft.de
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-741-5970
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixtures in aqueous solution
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| iron trichloride EC: 231-729-4 | 7705-08-0 | 40 - 45% | Yes |
| Hydrochloric acid EC: 231-595-7 | 7647-01-0 | 1 - 5% | Yes |
| nickel dichloride EC: 231-743-0 | 7718-54-9 | 0.1% | Yes |
Notes
This product does not contain substances of very high concern according to Regulation (EC) No 1907/2006 (REACH), Article 57 above the respective regulatory concentration limit of = 0.1 % (w/w).
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. Call a physician immediately.
Wash immediately with: Water Take off immediately all contaminated clothing and wash it before reuse. Call a physician immediately.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Remove contact lenses, if present and easy to do. Continue rinsing. Protect uninjured eye.
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting. Do not allow a neutralisation agent to be drunk. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately (after inhalation, skin contact, ingestion). Consult an ophthalmologist (after eye contact).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Ferric (III)-chloride, solution
UFI: 8THS-20FA-820N-VAF6
Ferric Chloride Solution
CAS: 7705-08-0
Iron(III) chloride hexahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
Iron(III) chloride hexahydrate for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 10025-77-1
Iron(III) chloride
CAS: 7705-08-0
Iron(II) chloride, ultra dry
CAS: 7758-94-3
Fehling B solution
---
Iron(III) chloride, anhydrous
CAS: 7705-08-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Protective gloves are recommended Company KCL GmbH, D-36124 Eichenzell, email: vertrieb@kcl.de With specification (test according to EN374): By long-term hand contact Trade name/designation: KCL 741 Dermatril L Recommended material: NBR (Nitrile rubber) 0,11 mm Wearing time with permanent contact: > 480 min By short-term hand contact Trade name/designation: KCL 741 Dermatril L Recommended material: NBR (Nitrile rubber) 0,11 mm Wearing time with occasional contact (splashes): > 480 min The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Suitable eye protection: goggles.
Wear breathing apparatus if exposed to vapours/dusts/aerosols.
Wear suitable protective clothing.
Do not allow to enter into surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 2582
- Shipping Name
- FERRIC CHLORIDE SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Eisen(III)-chloridlösung 40% FeCl3 technisch?
The signal word is danger.
What is the physical form of Eisen(III)-chloridlösung 40% FeCl3 technisch?
Eisen(III)-chloridlösung 40% FeCl3 technisch is a liquid with red brown color. It has characteristic odor.
What is the solubility of Eisen(III)-chloridlösung 40% FeCl3 technisch?
not determined
What is Eisen(III)-chloridlösung 40% FeCl3 technisch used for?
Laboratory chemicals, Industrial uses: Uses of substances as such or in preparations at industrial sites, Professional uses: Public domain (administration, education, entertainment, services, craftsmen)
What are the hazard statements for Eisen(III)-chloridlösung 40% FeCl3 technisch?
This substance has 5 hazard statements:
- H290: May be corrosive to metals.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
What is the melting point of Eisen(III)-chloridlösung 40% FeCl3 technisch?
The melting point is No data available and the boiling point is No data available.