NextSDS Logo
Lo

Loctite(R) 243 Threadlocker Medium Strength

WARNING Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Loctite(R) 243 Threadlocker Medium Strength
Product Form
Anaerobic Sealant
Product Code
24078

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Overview

Loctite(R) 243 Threadlocker Medium Strength .

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

warning (WARNING)

Hazard Classifications

Skin Sens.
Eye Irrit.
Skin Irrit.
STOT SE

GHS Hazard Pictograms & Safety Symbols

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

Precautionary Statements

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Henkel Corporation company logo - Safety Data Sheet supplier organization

Henkel Corporation

manufacturer

๐Ÿ“

1001 Trout Brook Crossing Rocky Hill, Connecticut 06067

๐ŸŒ

US

๐ŸŒ www.loctite.com

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

860.571.5100

๐ŸŒ

US

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Polyglycol dimethacrylate
EC: 607-819-8
25852-47-5 60-100% โš ๏ธ Hazardous
Polyglycol dioctanoate
EC: 242-149-6
18268-70-7 10-30% โš ๏ธ Hazardous
Amorphous fumed silica
EC: 271-893-4
68611-44-9 1-5% โš ๏ธ Hazardous
1,2-benzisothiazol-3(2H)-one 1,1-dioxide
EC: 201-321-0
81-07-2 1-5% โš ๏ธ Hazardous
1-Acetyl-2-phenylhydrazine 114-83-0 0.1-1% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Remove to fresh air. If symptoms develop and persist, get medical attention.

๐Ÿ–๏ธ Skin Contact

Wash with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if symptoms occur.

๐Ÿ‘๏ธ Eye Contact

Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get medical attention.

๐Ÿฝ๏ธ Ingestion/Swallowing

Do not induce vomiting. Keep individual calm. Obtain medical attention.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
Blue
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
Characteristic
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
Not applicable
๐ŸงŠ Melting Point
Not available
Critical Property
๐Ÿ’จ Boiling Point
Greater than 149C (300F)
Critical Property
๐Ÿ”ฅ Flash Point
Not available
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Not available
๐Ÿ’จ Vapor Pressure
Less than 0.1 mm Hg at 27C (80F)
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
1.08 at 20C (68F)
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not available
๐Ÿ“Š Upper Explosive Limit
Not available
๐Ÿ“Š Lower Explosive Limit
Not available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
Not available
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not available
๐Ÿ“Š Solubility In Water
Slight
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
0.7339%; 7.21 grams/liter
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

No specific ventilation requirements noted, but forced ventilation may still be required if concentrations exceed occupational exposure limits.

๐Ÿงค Hand Protection

Neoprene gloves. Butyl rubber gloves. Natural rubber gloves.

๐Ÿ‘๏ธ Eye Protection

Safety goggles or safety glasses with side shields.

๐Ÿ˜ท Respiratory Protection

Use NIOSH approved respirator if there is potential to exceed exposure limit(s).

๐Ÿฆบ Skin/Body Protection

Use impermeable gloves and protective clothing as necessary to prevent skin contact.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿ“ฆ Proper Shipping Name

Unrestricted

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Loctite(R) 243 Threadlocker Medium Strength?

The signal word for this substance is "warning".

What is the physical form of Loctite(R) 243 Threadlocker Medium Strength?

Loctite(R) 243 Threadlocker Medium Strength is a liquid with blue color. It has characteristic odor.

What is the melting point of Loctite(R) 243 Threadlocker Medium Strength?

The melting point is Not available and the boiling point is Greater than 149C (300F).