Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Akua Intaglio Ink and Transparent Base Bone Black EU, Graphite Gray EU, Mars Black EU, Green Oxide EU, Paynes Gray EU, Quinacridone Magenta EU, Opaque White EU, Metallic Silver EU, Metallic Gold EU, Raw Umber EU, Pyrrole Orange EU, Burnt Umber EU, Burnt Siena EU, Hansa Yellow EU, Diarylide Yellow EU, Scarlett Red EU, Crimson Red, Ultramarine Blue EU, Phthalo Blue EU, Carbazole Violet EU, Phthalo Green EU, Yellow Ochre EU, Van Dyke Brown EU, Titanium White EU, Red Oxide EU, Lamp Black EU, Carbon Black EU, Prussian Blue Hue EU, Cadmium Red Med. Hue EU, Transparent Base. is a liquid substance commonly used the product is intended for general (adults) arts and crafts purposes..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
GHS Hazard Pictograms & Safety Symbols
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
Precautionary Statements
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Speedball Art Products Company, LLC
manufacturer
2301 Speedball Rd Statesville, NC 28677 USA
US
+1 (704) 838-1475
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureGeneral Composition
The other ingredients in the product are either considered non-hazardous or are below their respective GHS cut-off values/concentration limits in the final product and were therefore not disclosed in the SDS. It should be noted that the product contains carbon black (CAS No. 1333-86-4), quartz (CAS No. 14808-60-7) and titanium dioxide (CAS No. 13463-67-7) which may be hazardous when inhaled. Given the nature and physical form of the product (i.e., liquid ink) airborne respirable particles would not likely be released from the product and therefore the hazard is not relevant to the product.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Anionic / Nonionic Surfactant Blend EC: Trade secret | Trade secret | 1.085% | ⚠️ Hazardous |
| Proplidynetrimethanol EC: 201-074-9 | 77-99-6 | 0.3798% | ⚠️ Hazardous |
| Tetramethyl-5-decyne-4,7-diol, 2,4,7,9- EC: 204-809-1 | 126-86-3 | 1.4392% | ⚠️ Hazardous |
Composition Notes
Concentrations are calculated as a maximum across all products, rather than by color.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If exposed to excessive levels of material in the air, move the exposed person to fresh air. Seek medical attention if in doubt.
🖐️ Skin Contact
If irritation occurs, wash with plenty of water and soap. Take off contaminated clothing. If skin irritation persists: Get medical advice/attention.
Symptoms:
If irritation occurs, skin irritation persists.
👁️ Eye Contact
remove contact lenses, if worn, and immediately flush eyes with water. Seek medical attention if in doubt.
🍽️ Ingestion/Swallowing
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Seek medical attention if in doubt.
🚨 Immediate Medical Attention Required
Not required.
Medical Treatment
Not required.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
No special requirements under ordinary conditions of use and with adequate ventilation. Mechanical ventilation or local exhaust ventilation may be required.
🧤 Hand Protection
Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur, wear chemically protective gloves.
👁️ Eye Protection
If contact is likely, safety glasses with side shields are recommended.
😷 Respiratory Protection
Under normal conditions of use, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.
🦺 Skin/Body Protection
Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Akua Intaglio Ink and Transparent Base Bone Black EU, Graphite Gray EU, Mars Black EU, Green Oxide EU, Paynes Gray EU, Quinacridone Magenta EU, Opaque White EU, Metallic Silver EU, Metallic Gold EU, Raw Umber EU, Pyrrole Orange EU, Burnt Umber EU, Burnt Siena EU, Hansa Yellow EU, Diarylide Yellow EU, Scarlett Red EU, Crimson Red, Ultramarine Blue EU, Phthalo Blue EU, Carbazole Violet EU, Phthalo Green EU, Yellow Ochre EU, Van Dyke Brown EU, Titanium White EU, Red Oxide EU, Lamp Black EU, Carbon Black EU, Prussian Blue Hue EU, Cadmium Red Med. Hue EU, Transparent Base.?
The signal word for this substance is "no signal word".
What is the physical form of Akua Intaglio Ink and Transparent Base Bone Black EU, Graphite Gray EU, Mars Black EU, Green Oxide EU, Paynes Gray EU, Quinacridone Magenta EU, Opaque White EU, Metallic Silver EU, Metallic Gold EU, Raw Umber EU, Pyrrole Orange EU, Burnt Umber EU, Burnt Siena EU, Hansa Yellow EU, Diarylide Yellow EU, Scarlett Red EU, Crimson Red, Ultramarine Blue EU, Phthalo Blue EU, Carbazole Violet EU, Phthalo Green EU, Yellow Ochre EU, Van Dyke Brown EU, Titanium White EU, Red Oxide EU, Lamp Black EU, Carbon Black EU, Prussian Blue Hue EU, Cadmium Red Med. Hue EU, Transparent Base.?
Akua Intaglio Ink and Transparent Base Bone Black EU, Graphite Gray EU, Mars Black EU, Green Oxide EU, Paynes Gray EU, Quinacridone Magenta EU, Opaque White EU, Metallic Silver EU, Metallic Gold EU, Raw Umber EU, Pyrrole Orange EU, Burnt Umber EU, Burnt Siena EU, Hansa Yellow EU, Diarylide Yellow EU, Scarlett Red EU, Crimson Red, Ultramarine Blue EU, Phthalo Blue EU, Carbazole Violet EU, Phthalo Green EU, Yellow Ochre EU, Van Dyke Brown EU, Titanium White EU, Red Oxide EU, Lamp Black EU, Carbon Black EU, Prussian Blue Hue EU, Cadmium Red Med. Hue EU, Transparent Base. is a liquid appearing as liquid . It has not available odor.
What is Akua Intaglio Ink and Transparent Base Bone Black EU, Graphite Gray EU, Mars Black EU, Green Oxide EU, Paynes Gray EU, Quinacridone Magenta EU, Opaque White EU, Metallic Silver EU, Metallic Gold EU, Raw Umber EU, Pyrrole Orange EU, Burnt Umber EU, Burnt Siena EU, Hansa Yellow EU, Diarylide Yellow EU, Scarlett Red EU, Crimson Red, Ultramarine Blue EU, Phthalo Blue EU, Carbazole Violet EU, Phthalo Green EU, Yellow Ochre EU, Van Dyke Brown EU, Titanium White EU, Red Oxide EU, Lamp Black EU, Carbon Black EU, Prussian Blue Hue EU, Cadmium Red Med. Hue EU, Transparent Base. used for?
The product is intended for general (adults) arts and crafts purposes.
What is the melting point of Akua Intaglio Ink and Transparent Base Bone Black EU, Graphite Gray EU, Mars Black EU, Green Oxide EU, Paynes Gray EU, Quinacridone Magenta EU, Opaque White EU, Metallic Silver EU, Metallic Gold EU, Raw Umber EU, Pyrrole Orange EU, Burnt Umber EU, Burnt Siena EU, Hansa Yellow EU, Diarylide Yellow EU, Scarlett Red EU, Crimson Red, Ultramarine Blue EU, Phthalo Blue EU, Carbazole Violet EU, Phthalo Green EU, Yellow Ochre EU, Van Dyke Brown EU, Titanium White EU, Red Oxide EU, Lamp Black EU, Carbon Black EU, Prussian Blue Hue EU, Cadmium Red Med. Hue EU, Transparent Base.?
The melting point is Not available and the boiling point is Not available.