NextSDS Logo
Safety Data Sheet EN

Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber)

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber)
Product Form
liquid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

A liquid pigment ink formulation used for general (adults) monotype brushwork, tinting and screen printing. The product is intended to be applied using a roller. The product is intended for general (adults) arts and crafts purposes.

Manufacturers & Suppliers

S

Speedball Art Products Company, LLC

manufacturer

2301 Speedball Rd Statesville, NC 28677 USA

+1 (704) 838-1475

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

The other ingredients in the product are either considered non-hazardous or are below their respective GHS cut-off values/concentration limits in the final product and were therefore not disclosed in the SDS.

Chemical Name CAS Number Concentration Hazardous
Carbon black EC: 215-609-9 1333-86-4 15.3764% Yes
Titanium dioxide EC: 236-675-5 13463-67-7 16.8884% Yes
Quartz EC: 238-878-4 14808-60-7 0.5284% Yes
Talc EC: 238-877-9 14807-96-6 0.3171% Yes
Propylidynetrimethanol EC: 201-074-9 77-99-6 0.1689% Yes
Styrene acrylic resin solution --- 1.8765% Yes
Anionic / nonionic surfactant blend --- 1.3704% Yes

Notes

Concentrations are calculated as a maximum across all products, rather than by color. It should be noted that the product may contain carbon black (CAS No. 1333-86-4), titanium dioxide (CAS No. 13463-67-7), and quartz (CAS No.14808-60-7), which may be hazardous when inhaled. Given the nature and physical form of the product (i.e., liquid) airborne respirable particles would not likely be released from the product and therefore the hazard is not relevant to the product.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If exposed to excessive levels of material in the air, move the exposed person to fresh air. Seek medical attention if in doubt.

Skin contact

If irritation occurs, wash with plenty of water and soap. Take off contaminated clothing. If skin irritation persists: Get medical advice/attention.

Symptoms: Irritation

Eye contact

remove contact lenses, if worn, and immediately flush eyes with water. Seek medical attention if in doubt.

Ingestion

Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Seek medical attention if in doubt.

Immediate Medical Attention

Not required.

Medical Treatment

Not required.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special requirements under ordinary conditions of use and with adequate ventilation. Mechanical ventilation or local exhaust ventilation may be required.

Hands

Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur, wear chemically protective gloves.

Eyes

If contact is likely, safety glasses with side shields are recommended.

Respiratory

Under normal conditions of use, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.

Skin/Body

Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material.

Environmental

Not available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
Not available
Bulk Density
---
Solubility In Fat
---
Partition Coefficient
Not available
Freezing Point
Not available
Evaporation Rate
Not available
Colour
see Section 1.1
Decomposition Temperature
Not available
Colour Intensity
---
Odor
Not available
Voc Content
Not available
Solidification Point
---
Metal Corrosion
---
Relative Density
Not available
Physical State
Liquid
Cloud Point
---
Form
---
Crystallisation Point
---
Auto Ignition Temperature
Not available
Flash Point
Not available
Softening Point
---
Vapor Pressure
Not available
State Under Standard Conditions
---
Solubility
---
Boiling Point
Not available
Flammability
Not available
Upper Explosive Limit
Not available
Odor Threshold
Not available
Vapor Density
Not available
Lower Explosive Limit
Not available
Physical State Data
liquid
Dynamic Viscosity
Not available
Density
---
Molecular Weight
Not available
Relative Evaporation Rate
---
Ph
6 - 9
Appearance
Liquid
Solubility In Water
Not available
Kinematic Viscosity
---
Properties Status
---
Explosive Limits
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber)?

The signal word is no signal word.

What is the physical form of Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber)?

Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber) is a liquid appearing as liquid with see section 1.1 color. It has not available odor.

What is Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber) used for?

A liquid pigment ink formulation used for general (adults) monotype brushwork, tinting and screen printing. The product is intended to be applied using a roller. The product is intended for general (adults) arts and crafts purposes.

What is the melting point of Akua Liquid Pigment Inks (Titanium White, Jet Black, Crimson Red, Hansa Yellow, Phthalo Blue, Ultramarine Blue, Lamp Black, Lemon Yellow, Phthalo Green Yellow, Pyrrole Orange, Burnt Sienna, Diarylide Yellow, Yellow Ochre, Burnt Umber, Scarlett Red, Quinacridone Red, Quinacridone Violet, Phthalo Green Blue, Phthalo Blue Green, Red Oxide, Raw Umber)?

The melting point is Not available and the boiling point is Not available.

Compliance Scanner

Scan your compliance