Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
AMERGY PPD NF is a clear off-white to yellow liquid. substance commonly used use according to manufacturer's directions..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS08
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H227: Combustible liquid.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P101: If medical advice is needed, have product container or label at hand.
- P102: Keep out of reach of children.
- P103: Read label before use.
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P261: Avoid breathing mist/vapours/spray.
- P271: Use only outdoors or in a well-ventilated area.
- P273: Avoid release to the environment.
- P280: Wear protective gloves and protective clothing.
- P301+P310: IF SWALLOWED: Immediately call a POISON CENTER/doctor/physician/first aider.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P308+P313: IF exposed or concerned: Get medical advice/ attention.
- P312: Call a POISON CENTER/doctor/physician/first aider/if you feel unwell.
- P331: Do NOT induce vomiting.
- P370+P378: In case of fire: Use alcohol resistant foam or normal protein foam to extinguish.
- P391: Collect spillage.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
- P403+P235: Store in a well-ventilated place. Keep cool.
- P405: Store locked up.
- P501: Dispose of contents/container to authorised hazardous or special waste collection point in accordance with any local regulation.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Drew Marine
manufacturer
400 Captain Neville Drive Waterbury, CT 06705 United States
US
+1-973-526-5700
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMWATCH EMERGENCY RESPONSE
+1 855-237-5573
US
24/7
Languages: EN, ES
CHEMWATCH
+61 3 9573 3188
AU
Languages: EN, ES
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| hydrocarbons, C10, aromatics, >1% naphthalene EC: 919-284-0 | 64742-94-5 | 80-92% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If fumes or combustion products are inhaled remove from contaminated area. Lay patient down. Keep warm and rested. Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. Transport to hospital, or doctor, without delay.
Symptoms:
If not breathing
🖐️ Skin Contact
If skin contact occurs: Immediately remove all contaminated clothing, including footwear. Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation.
Symptoms:
irritation
👁️ Eye Contact
If this product comes in contact with the eyes: Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Seek medical attention without delay; if pain persists or recurs seek medical attention. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
Symptoms:
pain persists or recurs
🍽️ Ingestion/Swallowing
If swallowed do NOT induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. Observe the patient carefully. Never give liquid to a person showing signs of being sleepy or with reduced awareness; i.e. becoming unconscious. Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. Seek medical advice. Avoid giving milk or oils. Avoid giving alcohol. If spontaneous vomiting appears imminent or occurs, hold patient's head down, lower than their hips to help avoid possible aspiration of vomitus.
Symptoms:
signs of being sleepy or with reduced awareness; i.e. becoming unconscious, spontaneous vomiting, difficult breathing (due to aspiration)
🚨 Immediate Medical Attention Required
Seek medical attention without delay; if pain persists or recurs seek medical attention (eye contact). Seek medical attention in event of irritation (skin contact). Transport to hospital, or doctor, without delay (inhalation). Seek medical advice (ingestion). Individuals intoxicated by petroleum distillates should be hospitalized immediately, with acute and continuing attention to neurologic and cardiopulmonary function. Severe anaemia, due to haemolysis, may require small repeated blood transfusions, preferably with red cells from a non-sensitive individual. Where intravascular haemolysis, with haemoglobinuria occurs, protect the kidneys by promoting a brisk flow of dilute urine with, for example, an osmotic diuretic such as mannitol. It may be useful to alkalinise the urine with small amounts of sodium bicarbonate but many researchers doubt whether this prevents blockage of the renal tubules. Use supportive measures in the case of acute renal failure.
Medical Treatment
Mechanical means should be used if it is considered necessary to evacuate the stomach contents; these include gastric lavage after endotracheal intubation. Positive pressure ventilation may be necessary. In case of ingestion, gastric lavage with activated charcoal can be used promptly to prevent absorption. For naphthalene: Induce emesis and/or perform gastric lavage with large amounts of warm water where oral poisoning is suspected. Instill a saline cathartic such as magnesium or sodium sulfate in water (15 to 30g). Demulcents such as milk, egg white, gelatin, or other protein solutions may be useful after the stomach is emptied but oils should be avoided because they promote absorption. If eyes/skin contaminated, flush with warm water followed by the application of a bland ointment. Severe anaemia, due to haemolysis, may require small repeated blood transfusions, preferably with red cells from a non-sensitive individual. Where intravascular haemolysis, with haemoglobinuria occurs, protect the kidneys by promoting a brisk flow of dilute urine with, for example, an osmotic diuretic such as mannitol. It may be useful to alkalinise the urine with small amounts of sodium bicarbonate but many researchers doubt whether this prevents blockage of the renal tubules. Use supportive measures in the case of acute renal failure.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Basic types include process controls, enclosure and/or isolation of emission sources, and ventilation. Local exhaust ventilation is usually required. If risk of overexposure exists, wear approved respirator. Supplied-air type respirator or self-contained breathing apparatus (SCBA) may be required in special circumstances. Adequate ventilation should be provided in warehouse or closed storage areas, with capture velocities adjusted based on contaminant type and conditions.
🧤 Hand Protection
Wear chemical protective gloves, e.g. PVC. Wear safety footwear or safety gumboots, e.g. Rubber. Glove selection depends on material, chemical resistance, frequency/duration of contact, thickness, and dexterity. Gloves should be tested to relevant standards (e.g., EN 374, US F739, AS/NZS 2161.1). For prolonged contact, a protection class 5 or higher (breakthrough time > 240 minutes) is recommended. For brief contact, class 3 or higher (breakthrough time > 60 minutes) is recommended. Contaminated gloves must be replaced. Gloves are rated as Excellent (>480 min), Good (>20 min), Fair (<20 min), or Poor (degrades). For general applications, gloves typically >0.35 mm are recommended, but thickness may vary based on task (e.g., thinner for dexterity, thicker for mechanical risk). Hands must be clean before wearing gloves, and washed/dried thoroughly afterwards, with moisturiser applied.
👁️ Eye Protection
Safety glasses with side shields. Chemical goggles. [AS/NZS 1337.1, EN166 or national equivalent]. Contact lenses may pose a special hazard; a written policy document should be created for their use, including review of lens absorption/adsorption. Medical and first-aid personnel should be trained in removal, and suitable equipment should be available. In case of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable. Lenses should be removed at the first signs of eye redness or irritation, in a clean environment after hands are washed.
😷 Respiratory Protection
Type A Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Z88 or national equivalent). Selection depends on contaminant level and chemical nature. Protection Factors are important. Cartridge respirators should not be used for emergency ingress or in areas of unknown vapour concentrations or oxygen content. Wearers must leave the area immediately if odours are detected. Cartridge performance is affected by humidity; cartridges should be changed after 2 hours of continuous use (or 4 hours if humidity < 75%) and discarded daily.
🦺 Skin/Body Protection
Overalls. P.V.C apron. Barrier cream. Skin cleansing cream. Safety footwear or safety gumboots, e.g. Rubber.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for AMERGY PPD NF?
The signal word for this substance is "danger".
What is the physical form of AMERGY PPD NF?
AMERGY PPD NF is a liquid appearing as clear off-white to yellow liquid. with off-white to yellow color. It has not available odor.
What is AMERGY PPD NF used for?
Use according to manufacturer's directions.
What are the hazard statements for AMERGY PPD NF?
This substance has 5 hazard statements: H227: Combustible liquid. H304: May be fatal if swallowed and enters airways. H336: May cause drowsiness or dizziness. H351: Suspected of causing cancer. H411: Toxic to aquatic life with long lasting effects.