Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
LIMAROSTA 316L is a steel rod with extruded flux coating. substance commonly used smaw (shielded metal arc welding).
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
GHS Hazard Pictograms & Safety Symbols
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
Precautionary Statements
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Lincoln Electric Europe B.V.
manufacturer
Collse Heide 12 Nuenen 5674 VN The Netherlands
NL
+31 243 522 911
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
USA/Canada/Mexico
+1 (888) 609-1762
US
Americas/Europe
+1 (216) 383-8962
US
Asia Pacific
+1 (216) 383-8966
US
Middle East/Africa
+1 (216) 383-8969
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Reportable Hazardous Ingredients 3.2 Mixtures
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Iron [Fe] EC: 231-096-4 | 7439-89-6 | 20-50% | ✓ Non-hazardous |
| Chromium and chromium alloys or compounds (as Cr) EC: 231-157-5 | 7440-47-3 | 10-20% | ✓ Non-hazardous |
| Titanium dioxide (synthetic) EC: 236-675-5 | 13463-67-7 | 5-10% | ✓ Non-hazardous |
| Nickel foam EC: 231-111-4 | 7440-02-0 | 5-10% | ⚠️ Hazardous |
| Natrium- en kaliumveldspaat / vedlspaat-natron en -kali EC: 270-666-7 | 68476-25-5 | 5-10% | ✓ Non-hazardous |
| Calciumcarbonat, gemahlen, natuurlijk EC: 215-279-6 | 1317-65-3 | 1-5% | ✓ Non-hazardous |
| Molybdenum EC: 231-107-2 | 7439-98-7 | 1-5% | ✓ Non-hazardous |
| Kaliumslicaat (MR<3.2) EC: 215-199-1 | 1312-76-1 | 1-5% | ⚠️ Hazardous |
| mangaan EC: 231-105-1 | 7439-96-5 | 1-5% | ✓ Non-hazardous |
| Bentoniet EC: 215-108-5 | 1302-78-9 | 1-5% | ✓ Non-hazardous |
| Calcium difluoride EC: 232-188-7 | 7789-75-5 | 0.1-1% | ✓ Non-hazardous |
| Iron oxide EC: 215-168-2 | 1309-37-1 | 0.1-1% | ✓ Non-hazardous |
| Kwartszanden/granulaten EC: 238-878-4 | 14808-60-7 | 0.1-1% | ⚠️ Hazardous |
| Titanium dioxide (synthetic) EC: 236-675-5 | 13463-67-7 | 0.1-1% | ⚠️ Hazardous |
| Zirconium oxide EC: 215-227-2 | 1314-23-4 | 0.1-1% | ✓ Non-hazardous |
| Graphite/Acetylene Black EC: 215-691-6 | 1344-28-1 | 0.1-1% | ✓ Non-hazardous |
| Silicon dioxide (amorphous) EC: 231-545-4 | 7631-86-9 | 0.1-1% | ✓ Non-hazardous |
| Calcium alginate EC: 618-413-5 | 9005-35-0 | 0.1-1% | ✓ Non-hazardous |
| Lithium fluoride EC: 232-152-0 | 7789-24-4 | 0.1-1% | ⚠️ Hazardous |
| Sodium silicate SiO2/Na2O EC: 215-687-4 | 1344-09-8 | 0.1-1% | ⚠️ Hazardous |
| Lithium silicate EC: 233-270-5 | 10102-24-6 | 0.1-1% | ⚠️ Hazardous |
| Carboxymethyl cellulose, sodium salt EC: 618-378-6 | 9004-32-4 | 0.1-1% | ✓ Non-hazardous |
| Silicium EC: 231-130-8 | 7440-21-3 | 0.1-1% | ✓ Non-hazardous |
Composition Notes
The term "Hazardous Ingredients" should be interpreted as a term defined in Hazard Communication standards and does not necessarily imply the existence of a welding or allied process hazard. The product may contain additional non-hazardous ingredients or may form additional compounds under the condition of use. Refer to Sections 2 and 8 for more information.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air if breathing is difficult. If breathing has stopped, perform artificial respiration and obtain medical assistance at once.
🖐️ Skin Contact
Remove contaminated clothing and wash the skin thoroughly with soap and water. For reddened or blistered skin, or thermal burns, obtain medical assistance at once.
Symptoms:
reddened or blistered skin, or thermal burns
👁️ Eye Contact
Dust or fume from this product should be flushed from the eyes with copious amounts of clean, tepid water until transported to an emergency medical facility. Do not allow victim to rub or keep eyes tightly closed. Obtain medical assistance at once. Arc rays can injure eyes. If exposed to arc rays, move victim to dark room, remove contact lenses as necessary for treatment, cover eyes with a padded dressing and rest. Obtain medical assistance if symptoms persist.
🍽️ Ingestion/Swallowing
Avoid hand, clothing, food, and drink contact with fluxes, metal fume or powder which can cause ingestion of particulate during hand to mouth activities such as drinking, eating, smoking, etc. If ingested, do not induce vomiting. Contact a poison control center. Unless the poison control center advises otherwise, wash out mouth thoroughly with water. If symptoms develop, seek medical attention at once.
🚨 Immediate Medical Attention Required
If breathing has stopped, obtain medical assistance at once. For reddened or blistered skin, or thermal burns, obtain medical assistance at once. For eye contact, obtain medical assistance at once. If symptoms persist after arc ray exposure, obtain medical assistance. If ingestion symptoms develop, seek medical attention at once.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ventilation: Use enough ventilation and local exhaust at the arc, flame or heat source to keep the fumes and gases from the worker's breathing zone and the general area. Train the operator to keep their head out of the fumes. Keep exposure as low as possible.
🧤 Hand Protection
Wear protective gloves. Suitable gloves can be recommended by the glove supplier.
👁️ Eye Protection
Wear helmet or use face shield with filter lens shade number 12 or darker for open arc processes - or follow the recommendations as specified in ANSI Z49.1, Section 4, based on your process and settings. No specific lens shade recommendation for submerged arc or electroslag processes. Shield others by providing appropriate screens and flash goggles.
😷 Respiratory Protection
Keep your head out of fumes. Use enough ventilation and local exhaust to keep fumes and gases from your breathing zone and the general area. An approved respirator should be used unless exposure assessments are below applicable exposure limits.
🦺 Skin/Body Protection
Protective Clothing: Wear hand, head, and body protection which help to prevent injury from radiation, open flames, hot surfaces, sparks and electrical shock. See Z49.1. At a minimum, this includes welder's gloves and a protective face shield when welding, and may include arm protectors, aprons, hats, shoulder protection, as well as dark substantial clothing when welding, brazing and soldering. Wear dry gloves free of holes or split seams. Train the operator not to permit electrically live parts or electrodes from contacting the skin . . . or clothing or gloves if they are wet. Insulate yourself from the work piece and ground using dry plywood, rubber mats or other dry insulation.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
📦 Proper Shipping Name
NOT DG REGULATED
⚠️ Transport Hazard Class
NR
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for LIMAROSTA 316L?
The signal word for this substance is "no signal word".
What is the physical form of LIMAROSTA 316L?
LIMAROSTA 316L is a solid appearing as steel rod with extruded flux coating. .
What is LIMAROSTA 316L used for?
SMAW (Shielded Metal Arc Welding)