Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- STERANIOS 2%
- Product Code
- 382000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfection of medical devices
Manufacturers & Suppliers
Laboratoires ANIOS
manufacturer
PAVE DU MOULIN .59260.LILLE - HELLEMMES.FRANCE
+ 33 (0)3 20 67 67 67
www.anios.com
Emergency Contacts
INRS
+ 33(0)1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| GLUTARALDEHYDE EC: 203-856-5 | 111-30-8 | 2.5% | Yes |
[1] Substance for which maximum workplace exposure limits are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the person away from the place of exposure and take him/her outside. In the event of respiratory problems (e.g. heavy coughing): Put the person in a half-seated position, with the torso raised; keep the person warm and calm. Call a doctor immediately.
Symptoms: respiratory problems (e.g. heavy coughing)
Remove all contaminated or stained clothing immediately. Do not use them again until they have been decontaminated. Rinse immediately and thoroughly with water. In the event of skin irritation, seek medical advice. Show this container or label.
Symptoms: skin irritation
If applicable, remove contact lenses. Wash thoroughly with soft clean water for 15 minutes, holding the eyelids open. Take care not to introduce rinsing water in the undamaged eye. Additional treatment to be provided immediately in an eye clinic or by an ophthalmologist. Continue rinsing until medical advice is obtained.
Rinse out the mouth, do not allow to drink, do not induce vomiting. Calm the person down and transfer immediately to hospital or doctor. Show the label to the doctor.
Immediate Medical Attention
Call a doctor immediately (inhalation). Additional treatment to be provided immediately in an eye clinic or by an ophthalmologist (eyes). In the event of skin irritation, seek medical advice (skin). Transfer immediately to hospital or doctor (swallowing).
Medical Treatment
Refer to the recommendation of the doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, sand, carbon dioxide, water, powder.
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.
Do not breathe in smoke.
Firefighter Protection
fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus. Full protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under headings 7 and 8. Keep away any unprotected person. Avoid inhaling the fumes. Avoid all contact with skin or eyes.
Do not get rid in natural spaces (waterways, ground and vegetations...)
Absorb any spilled product with absorbent non-combustible materials, and sweep away or remove with a shovel. Put any waste in drums for disposal. Do not mix with any other waste. Wash the contaminated surface thoroughly with water. Do not collect the product for re-use.
Materials: absorbent non-combustible materials
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Product for external use - do not swallow. Avoid all contact with skin, eyes and clothes. Handle in accordance with user instructions on label
Keep the container tightly closed. Store ONLY in the original package. Store between + 5 °C and + 35 °C in a dry, well ventilated place. Do not use after the expiry date mentioned on the packaging. Keep out of the reach of children. Store away from incompatible materials (see section 10)
No smoking, eating or drinking in areas where the mixture is used. Change any contaminated or wet work clothes immediately.
Handle in well-ventilated areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure the rooms are well-ventilated. Atmospheric concentrations at the workplace must not exceed the limit values given for normal conditions of use.
Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question: other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. When handling this product, wear suitable gloves. Butyl or nitrile gloves are recommended. Gloves must be replaced immediately if they show signs of wear and tear.
Before handling, wear safety goggles with protective sides accordance with standard EN166. Prescription glasses are not considered as protection. Avoid all contact with skin or eyes. Make gloves and safety goggles with side protection available to the personnel. Provide eye washes in workshops.
In case of insufficient ventilation, with the risk of exceeding the TLVs (Treshold Limit Values)/TWA, wear suitable breathing apparatus. Use Type A1P1 or A2P2 filters.
Avoid skin contact. Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed. Change wet and dirty work clothes immediately.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
No hazardous reaction if the instructions/indications for storage and handling are respected.
Cf. § 10.1 and 10.2
Avoid : - frost. Do not mix with other products.
Latex. Refer to the scientific folder*: product/material compatibility table * available on request
At high temperatures, dangerous decomposition products may be produced, such as fumes, carbon dioxide and carbon monoxide, nitrogen oxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for STERANIOS 2%?
The signal word is danger.
What is the physical form of STERANIOS 2%?
STERANIOS 2% is a fluid liquid. with green color. It has typical odor.
What is STERANIOS 2% used for?
Disinfection of medical devices
What are the hazard statements for STERANIOS 2%?
This substance has 5 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H335: May cause respiratory irritation.
What is the melting point of STERANIOS 2%?
The melting point is Not specified. and the boiling point is Not specified..