Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Benzoylecgonine-D8 (1.0 mg/ml) in Methanol commonly used reference material for laboratory use only.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS06
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapour.
- H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
- H370: Causes damage to organs.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
LGC Limited
manufacturer
Queens Road Teddington Middlesex TW11 0LY UNITED KINGDOM
GB
+44 (0) 20 8943 2767
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+44 (0) 20 8943 7000
GB
Monday - Friday : 8am - 5pm
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Mixture: consisting of the following components.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methanol EC: 200-659-6 | 67-56-1 | 99% | ⚠️ Hazardous |
| Benzoylecgonine-D8 EC: 803-386-6 | 205446-21-5 | 0.1% | ⚠️ Hazardous |
Additional Information
For the wording of the listed hazard phrases refer to section 16. The minor component in this product has been isotopically labelled with deuterium, a stable form of hydrogen.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient in recovery position for transport.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
Rinse mouth. Do not induce vomiting. Call a doctor immediately.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374 Protective gloves Material of gloves Butyl rubber, BR Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
👁️ Eye Protection
Tightly sealed goggles
😷 Respiratory Protection
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1230
📦 Proper Shipping Name
METHANOL, mixture
⚠️ Transport Hazard Class
3 Flammable liquids.
📋 Packing Group
II
🚛 ADR Transport Precautions
Warning: Flammable liquids.
🚢 IMDG Maritime Transport Precautions
Warning: Flammable liquids.
✈️ IATA Air Transport Precautions
Warning: Flammable liquids.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Benzoylecgonine-D8 (1.0 mg/ml) in Methanol?
The signal word for this substance is "danger".
What is the physical form of Benzoylecgonine-D8 (1.0 mg/ml) in Methanol?
Benzoylecgonine-D8 (1.0 mg/ml) in Methanol is a liquid with colourless color. It has alcohol-like odor.
What is Benzoylecgonine-D8 (1.0 mg/ml) in Methanol used for?
Reference material for laboratory use only
What are the hazard statements for Benzoylecgonine-D8 (1.0 mg/ml) in Methanol?
This substance has 3 hazard statements: H225: Highly flammable liquid and vapour. H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled. H370: Causes damage to organs.
What is the melting point of Benzoylecgonine-D8 (1.0 mg/ml) in Methanol?
The melting point is -98 C and the boiling point is 65 C.