NextSDS Logo
3-

3-36 Multi-Purpose Lubricant & Corrosion Inhibitor

DANGER Liquid. SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
3-36 Multi-Purpose Lubricant & Corrosion Inhibitor
Product Code
03006

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Multi-purpose lubricant
Uses Advised Against
None known.

Overview

3-36 Multi-Purpose Lubricant & Corrosion Inhibitor commonly used multi-purpose lubricant.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Flam. Liq. Category 4
Skin Sens. Category 1
Asp. Tox. Category 1
Aquatic Acute Category 3

GHS Hazard Pictograms & Safety Symbols

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H227: Combustible liquid.
  • H304: May be fatal if swallowed and enters airways.
  • H317: May cause an allergic skin reaction.
  • H402: Harmful to aquatic life.

Precautionary Statements

  • Keep away from flames and hot surfaces-No smoking.
  • Use with adequate ventilation.
  • Open doors and windows or use other means to ensure a fresh air supply during use and while product is drying.
  • If you experience any symptoms listed on this label, increase ventilation or leave the area.
  • Avoid breathing gas, mist or vapor.
  • Contaminated work clothing must not be allowed out of the workplace.
  • Wear protective gloves/eye protection/face protection.
  • Wash thoroughly after handling.
  • Avoid release to the environment.
  • If swallowed: Immediately call a poison center/doctor.
  • Do NOT induce vomiting.
  • If on skin: Wash with plenty of water.
  • If skin irritation or rash occurs: Get medical attention.
  • Wash contaminated clothing before reuse.
  • In case of fire: Do not use water jet as an extinguisher, as this will spread the fire.
  • Keep cool.
  • Store locked up.
  • Dispose of contents/container in accordance with local/regional/national regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

CRC Industries, Inc. company logo - Safety Data Sheet supplier organization

CRC Industries, Inc.

manufacturer

๐Ÿ“

885 Louis Dr. Warminster, PA 18974 US

๐ŸŒ

US

๐Ÿ“ž

215-674-4300

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTREC

๐Ÿ“ž

800-424-9300

๐ŸŒ

US

๐Ÿ•’

24-Hour

๐Ÿ’ก

(US)

CHEMTREC

๐Ÿ“ž

703-527-3887

๐Ÿ•’

24-Hour

๐Ÿ’ก

(International)

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Mixtures

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
distillats lรฉgers (pรฉtrole), hydrotraitรฉs
EC: 917-488-4
64742-47-8 60-70% โœ“ Non-hazardous
Paraffinehoudende oliHen (aardolie), katalytisch van was ontdane zware
EC: 265-174-4
64742-70-7 10-20% โœ“ Non-hazardous
dipropylene glycol monomethyl ether acetate
EC: 406-880-6
88917-22-0 5-10% โœ“ Non-hazardous
paraffin oils (petroleum), catalytic dewaxed light
EC: 265-176-5
64742-71-8 5-10% โœ“ Non-hazardous
butylstearaat
EC: 204-666-5
123-95-5 3-5% โœ“ Non-hazardous
Petrolatum, Micro Soft Wax
EC: 232-373-2
8009-03-8 1-3% โœ“ Non-hazardous
Fatty Acids, C18-unsatd., Dimers
EC: 500-148-0
61788-89-4 1% โœ“ Non-hazardous
(R)-p-mentha-1,8-diene 5989-27-5 0.2% โœ“ Non-hazardous
p-Mentha-1,4-diene
EC: 209-578-0
586-62-9 0.2% โœ“ Non-hazardous

Composition Notes

Specific chemical identity and/or percentage of composition has been withheld as a trade secret.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Move to fresh air. Call a physician if symptoms develop or persist.

๐Ÿ–๏ธ Skin Contact

Remove contaminated clothing immediately and wash skin with soap and water. In case of eczema or other skin disorders: Seek medical attention and take along these instructions.

Symptoms:

May cause an allergic skin reaction. Dermatitis. Rash.

๐Ÿ‘๏ธ Eye Contact

Rinse with water. Get medical attention if irritation develops and persists.

๐Ÿฝ๏ธ Ingestion/Swallowing

Call a physician or poison control center immediately. Do not induce vomiting. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs.

Symptoms:

Aspiration may cause pulmonary edema and pneumonitis.

๐Ÿšจ Immediate Medical Attention Required

Call a physician or poison control center immediately.

Medical Treatment

Provide general supportive measures and treat symptomatically. Keep victim under observation.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Liquid.
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
Blue green
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Liquid.
๐Ÿ‘ƒ Odor
Pleasant.
๐Ÿ“Š Odor Threshold
Not available.
๐Ÿงช Ph
Not available.
๐ŸงŠ Melting Point
-56.2 F (-49 C) estimated
Critical Property
๐Ÿ’จ Boiling Point
380 F (193.3 C) estimated
Critical Property
๐Ÿ”ฅ Flash Point
192 F (88.9 C) Tag Closed Cup
Critical Property
๐Ÿ“Š Freezing Point
-56.2 F (-49 C) estimated
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
Slow.
๐Ÿ’จ Vapor Pressure
0.3 hPa estimated
๐Ÿ“Š Vapor Density
> 1 (air = 1)
๐Ÿ“Š Relative Density
0.83
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not available.
๐Ÿ“Š Upper Explosive Limit
5.5 % estimated
๐Ÿ“Š Lower Explosive Limit
0.6 % estimated
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
428 F (220 C) estimated
๐Ÿ“Š Decomposition Temperature
Not available.
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
Not available.
๐Ÿ“Š Solubility In Water
Not available.
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available.
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

๐Ÿงค Hand Protection

Wear protective gloves such as: Nitrile. Neoprene.

๐Ÿ‘๏ธ Eye Protection

Wear safety glasses with side shields (or goggles).

๐Ÿ˜ท Respiratory Protection

If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathing apparatus in confined spaces and for emergencies. Air monitoring is needed to determine actual employee exposure levels.

๐Ÿฆบ Skin/Body Protection

Wear appropriate chemical resistant clothing. Use of an impervious apron is recommended.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for 3-36 Multi-Purpose Lubricant & Corrosion Inhibitor?

The signal word for this substance is "danger".

What is the physical form of 3-36 Multi-Purpose Lubricant & Corrosion Inhibitor?

3-36 Multi-Purpose Lubricant & Corrosion Inhibitor is a liquid. with blue green color. It has pleasant. odor.

What is 3-36 Multi-Purpose Lubricant & Corrosion Inhibitor used for?

Multi-purpose lubricant

What are the hazard statements for 3-36 Multi-Purpose Lubricant & Corrosion Inhibitor?

This substance has 4 hazard statements: H227: Combustible liquid. H304: May be fatal if swallowed and enters airways. H317: May cause an allergic skin reaction. H402: Harmful to aquatic life.

What is the melting point of 3-36 Multi-Purpose Lubricant & Corrosion Inhibitor?

The melting point is -56.2 F (-49 C) estimated and the boiling point is 380 F (193.3 C) estimated.