NextSDS Logo
Safety Data Sheet EN

UV-Primer

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
UV-Primer
Product Code
LM 4567

Regulatory Identifiers

CAS Number
N/A

Identified Uses

UV-Lacquer

Manufacturers & Suppliers

Lab-Lacko GmbH logo

Lab-Lacko GmbH

manufacturer

Bonnensstrasse 22, 32052 Herford

+49 (0) 5221 - 26794-0

http://www.lab-lacko.de

Emergency Contacts

Emergency Contact

0800-181-7059

Emergency Contact

1-800-434-9300

Emergency Contact

+001 703 527 3887

Emergency Contact

4001 204937

ZH

Emergency Contact

800 968 783

ZH

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1 H317
STOT SE Cat. 3 H335
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P260 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362 Take off contaminated clothing and wash it before reuse.
P405 Keep locked up.
P501 Dispose of contents/cantainer to industrial incineration plant.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

acrylic resin

Chemical Name CAS Number Concentration Hazardous
2,2-bis(acryloyloxymethyl)butyl acrylate EC: 239-701-3 15025-89-5 --- Yes
acrylic acid EC: 201-177-9 78-10-7 --- Yes
hexamethylene diacrylate EC: 235-921-9 13048-33-4 25 - 50% Yes
moquinol EC: 205-769-8 150-76-5 0.5% Yes
1,2-ethanediyl diacrylate EC: 218-886-4 2274-11-5 0.5 - 1% Yes
UV-resin --- 20 - 25% Yes

Full text of R-phrases: see section 16. Full text of H-phrases: see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove casually to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration. Call a physician immediately. If unconscious place in recovery position and seek medical advice.

Skin contact

Remove contaminated, saturated clothing immediately. After contact with skin, wash immediately with plenty of water and soap. Do not use solvents or thinners. Conditions to avoid: UV-radiation/sunlight. Call a physician immediately. Wash contaminated clothing before reuse.

Symptoms: May irritate skin. May cause sensitization by skin contact.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately. Show this safety data sheet to the doctor in attendance.

Symptoms: May irritate eyes.

Ingestion

Remove casually to fresh air and keep warm and at rest. Seek medical advice immediately. Show this safety data sheet to the doctor in attendance. Keep victim calm. Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person or a person with cramps. If unconscious place in recovery position and seek medical advice. Do not leave affected person unattended.

Immediate Medical Attention

Call a physician immediately.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Co-ordinate fire-fighting measures to the fire surroundings.

Unsuitable media

strong water jet

Specific hazards

Dense block smoke occurs during fire. Inhaling hazardous decomposing products can cause serious health damage. In case of fire may be liberated: Gases/reapours, harmful, carbon dioxide, carbon monoxide.

Instructions

Cool closed containers that are near the source of the fire.

Firefighter Protection

Wear a self-contained breathing apparatus and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety.

Environmental

Do not allow to enter into surface water or drains.

Cleanup methods

Clean using cleaning agents. Do not use solvents.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use only in well-ventilated areas. Keep away from heat sources, sparks and open flames. Avoid contact with skin, eyes and clothes. Do not inhale dusts, particulates and spray mist when using this preparation. Avoid respiration of swart. When using do not eat, drink or smoke. Do not empty containers with pressure - no pressure vessel! Always keep in containers that correspond to the material of the original container. Follow the legal protection and safety regulations. Take precautionary measures against static discharge. Handle and open container with care.

Storage

Keep container tightly closed. Do not empty containers with pressure - no pressure vessel! Smoking is forbidden. Store carefully closed containers upright to prevent any leaks. Store in a well-ventilated and dry room at temperatures between 15 °C and 30 °C. Protect from heat and direct sunlight. Remove all sources of ignition. Keep only in the original container.

Hygiene

Wash hands before breaks and after work. Remove contaminated, saturated clothing immediately. Contaminated work clothing should not be allowed out of the workplace. Handle in accordance with good industrial hygiene and safety practice. Keep work clothes separately. Wash contaminated clothing prior to re-use. Keep away from food, drink and animal feeding stuffs. Quarantine that the eye flushing systems and safety showers are closely located to the working place.

Fire prevention

Keep away from heat sources, sparks and open flames. Take precautionary measures against static discharge. Remove all sources of ignition. Smoking is forbidden.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide good ventilation. This can be achieved with local or room suction.

Hands

For prolonged or repeated handling the following glove material must be used. Chemical proof safety gloves (Techness of the glove material > 0.4 mm, Breakthrough time (maximum wearing time) > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles DIN EN 374. Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.

Eyes

Wear eye glasses with side protection according to EN 166.

Respiratory

If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number, respirator with A/P-filter (EN 14387)

Skin/Body

Wear antistatic clothing at natural fibers (cotton) or heat resistant synthetic fibers.

Environmental

Do not allow to enter into surface water or drains. Discharge into the environment must be avoided. If the product contaminates lakes, rivers or sewages, inform competent authorities in accordance with local regulations. See section 7. No additional measures necessary.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
---
Solubility In Water
insoluble
Melting Point
---
Voc Content
---
Bulk Density
---
Lower Explosive Limit
n.d. Vol-%
Appearance
---
Colour Intensity
---
Partition Coefficient
not determined
Evaporation Rate
not determined
Molecular Weight
---
Relative Density
---
Auto Ignition Temperature
n.d. °C
Flash Point
> 60 °C
Boiling Point
---
Explosive Limits
---
Decomposition Temperature
---
Vapor Pressure
n.d. mbar
State Under Standard Conditions
---
Form
---
Vapor Density
---
Freezing Point
---
Metal Corrosion
---
Solubility In Fat
---
Kinematic Viscosity
n.d.
Physical State
liquid
Density
n.d. g/cm³
Ph
n.d.
Properties Status
---
Solidification Point
---
Odor
chloro benzoic
Softening Point
---
Cloud Point
---
Relative Evaporation Rate
---
Colour
colourless
Odor Threshold
---
Dynamic Viscosity
---
Physical State Data
liquid
Crystallisation Point
---
Upper Explosive Limit
n.d. Vol-%
Solubility
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under storage at normal ambient temperatures.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

No hazardous reaction when handled and stored according to provisions.

Avoid

Heat, strong ultraviolet radiation. An exotherm polymerization of the product may thereby be caused. Avoid unintended contact with it. Hazardous decomposition byproducts may form with exposure to high temperatures. Protect from frost.

Incompatible

Radical former, Oxidising agent, Peroxide.

Decomposition

Hazardous decomposition byproducts may form with exposure to high temperatures, e.g., carbon dioxide, carbon monoxide, smoke. Gases/vepours, harmful.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way. Waste disposal according to directive 2006/98/EC, covering waste and dangerous waste.

Disposal

Do not allow to enter into surface water or drains. This material and its container must be disposed of in a safe way.

Waste Codes

080111 waste paint and varnish containing organic solvents or other dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
n.a.
Transport Class
n.a.
Packing Group
n.a.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed

Observe restrictions to employment for juvenile according to the 'juvenile work protection guideline' (94/23/EC).

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for UV-Primer?

The signal word is warning.

What is the physical form of UV-Primer?

UV-Primer is a liquid with colourless color. It has chloro benzoic odor.

What is UV-Primer used for?

UV-Lacquer

What are the hazard statements for UV-Primer?

This substance has 5 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H412: Harmful to aquatic life with long lasting effects.

Compliance Scanner

Scan your compliance