Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- V1/50, VS, V1/50SF
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Building material
Manufacturers & Suppliers
PAGEL Spezial-Beton GmbH & Co. KG
manufacturer
Wolfsbankring 9, 45355 Essen, Germany
+49 201/68504-0
http://www.pagel.com
Emergency Contacts
Giftnotruf Mainz
+49 (0) 6131-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Description of the mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| quartz EC: 238-878-4 | 14808-60-7 | 25 - 50% | Yes |
| portland cement EC: 266-043-4 | 65997-15-1 | 25 - 50% | Yes |
| flue dust, portland cement EC: 270-659-9 | 68475-76-3 | 1 - 3% | Yes |
Notes
Notes IOELV: Substance with a community indicative occupational exposure limit value For full text of H-phrases: see SECTION 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.
Symptoms: Cough, pain, choking, and breathing difficulties.
After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water and soap. Brush off loose particles from skin. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: Skin irritation or rash.
Rinse immediately carefully and thoroughly with eye shower or water. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.
Symptoms: Risk of serious damage to eyes.
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting. Get immediate medical advice/attention.
Immediate Medical Attention
Get immediate medical advice/attention for eye contact and ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, foam, alcohol resistant foam, fire extinguishing powder, Co-ordinate firefighting measures to the fire surroundings
water jet
Non-combustible.
Keep containers cool with water spray. In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
self-contained breathing apparatus (SCBA)
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety. Ventilate affected area. Control of dust. Do not breathe dust. Do not get in eyes, on skin, or on clothing.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Take up mechanically. Collect spillage. Vacuuming techniques.
Materials: Approved industrial vacuum cleaner.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not breathe dust. When diluting, always stir the product into standing water.
Store in a dry place. Store in a closed container. Keep container tightly closed and in a well-ventilated place.
Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Do not breathe dust. Do not get in eyes, on skin, or on clothing. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended.
None.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use local and general ventilation.
Material: NBR: acrylonitrile-butadiene rubber. Thickness/Breakthrough: no information available. Standards: EN 374. Instructions: Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear eye/face protection. (EN 166).
In case of inadequate ventilation wear respiratory protection. Particle filter device (DIN EN 143).
Protective clothing for use against solid particulates. (EN 13832, EN 340, EN 14605).
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
This material is not reactive under normal ambient conditions.
Reactions with light metals to form hydrogen.
Protect from moisture.
acids, aluminium, ammonium compounds, metals
Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
This material must be disposed of as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not assigned
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Observe employment restrictions for young people according to § 22 JArbSchG. Observe occupational restrictions for mothers acc. to § 11 MuSchG!
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for V1/50, VS, V1/50SF?
The signal word is danger.
What is the physical form of V1/50, VS, V1/50SF?
V1/50, VS, V1/50SF is a solid with grey - white color. It has odourless odor.
What is V1/50, VS, V1/50SF used for?
Building material
What are the hazard statements for V1/50, VS, V1/50SF?
This substance has 4 hazard statements:
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
What is the melting point of V1/50, VS, V1/50SF?
The melting point is >1.250 °C and the boiling point is not determined.