NextSDS Logo
Safety Data Sheet EN

Hercobond™ 6950 Paper Performance Additive

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Hercobond™ 6950 Paper Performance Additive

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Paper Performance Additive

Manufacturers & Suppliers

S

Solenis LLC

500 Hercules Road Wilmington, Delaware 19808 United States of America (USA)

Emergency Contacts

Solenis LLC

1-844-SOLENIS (844-765-3647)

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Hazard Statements

This material is not considered hazardous under the OSHA Hazard Communication Standard (HazCom 2012).

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathed in, move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

Skin contact

First aid is not normally required. However, it is recommended that exposed areas be cleaned by washing with soap and water.

Eye contact

Flush eyes with water as a precaution. Remove contact lenses. Protect unharmed eye. If eye irritation persists, consult a specialist.

Ingestion

Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Immediate Medical Attention

If unconscious, seek medical advice. If symptoms persist, call a physician. If eye irritation persists, consult a specialist.

Medical Treatment

No hazards which require special first aid measures.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Water spray, Foam, Carbon dioxide (CO2), Dry chemical

Unsuitable media

High volume water jet

Instructions

Product is compatible with standard fire-fighting agents.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Comply with all applicable federal, state, and local regulations.

Environmental

Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities.

Cleanup methods

Keep in suitable, closed containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Container hazardous when empty. For personal protection see

Hygiene

Smoking, eating and drinking should be prohibited in the application area.

Fire prevention

Normal measures for preventive fire protection.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below exposure guidelines (if applicable) or below levels that cause known, suspected or apparent adverse effects.

Hands

The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Eyes

Not required under normal conditions of use. Wear splash-proof safety goggles if material could be misted or splashed into eyes.

Skin/Body

Wear resistant gloves (consult your safety equipment supplier). Wear as appropriate: Impervious clothing Safety shoes Choose body protection according to the amount and concentration of the dangerous substance at the work place.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Explosive Limits
---
Evaporation Rate
0.02 n-butyl acetate=1
Decomposition Temperature
No data available
Solubility
Water solubility : soluble Solubility in other solvents : insoluble Solvent: Acetone
Cloud Point
---
Dynamic Viscosity
650 mPa.s (23 °C)
Appearance
liquid
Ph
7.0 - 9.0
Physical State Data
liquid
Physical State
liquid
Metal Corrosion
---
Bulk Density
---
Kinematic Viscosity
No data available
Form
---
Solidification Point
---
Vapor Density
---
Solubility In Water
soluble
Boiling Point
98.9 - 115.6 °C
Solubility In Fat
---
Odor
---
Vapor Pressure
30.66 hPa
Melting Point
0 °C
Flammability
No data available
Upper Explosive Limit
No data available
Flash Point
does not flash
Softening Point
---
Crystallisation Point
---
Auto Ignition Temperature
No data available
Odor Threshold
No data available
Partition Coefficient
No data available
Voc Content
---
Molecular Weight
---
Colour Intensity
---
State Under Standard Conditions
---
Relative Density
1.1306 (23 °C)
Density
1.1306 g/cm3 (23 °C)
Lower Explosive Limit
No data available
Properties Status
---
Relative Evaporation Rate
---
Colour
light yellow, amber
Freezing Point
0 °C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No decomposition if stored and applied as directed.

Hazardous reactions

Product will not undergo hazardous polymerization.

Incompatible

Strong acids

Decomposition

Carbon monoxide Carbon dioxide (CO2) Sodium oxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3082
Shipping Name
Environmentally hazardous substance, liquid, n.o.s. (FORMAMIDE, ETHENYL-, HOMOPOLYMER, HYDROLYZED, DIMAPA-QUAT CONJUGATE, HYDROCHLORIDES)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Hercobond™ 6950 Paper Performance Additive?

The signal word is no signal word.

What is the physical form of Hercobond™ 6950 Paper Performance Additive?

Hercobond™ 6950 Paper Performance Additive is a liquid appearing as liquid with light yellow, amber color.

What is the solubility of Hercobond™ 6950 Paper Performance Additive?

Water solubility : soluble Solubility in other solvents : insoluble Solvent: Acetone

What is Hercobond™ 6950 Paper Performance Additive used for?

Paper Performance Additive

What are the hazard statements for Hercobond™ 6950 Paper Performance Additive?

This substance has 1 hazard statement:

  • This material is not considered hazardous under the OSHA Hazard Communication Standard (HazCom 2012).

What is the melting point of Hercobond™ 6950 Paper Performance Additive?

The melting point is 0 °C and the boiling point is 98.9 - 115.6 °C.

Compliance Scanner

Scan your compliance