Ammonium sulfate

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Symptoms: breathing is difficult

In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention. Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.

Symptoms: irritated skin

Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.

SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam.

Do not use water jet.

Flammable in presence of oxidizing materials. Slightly flammable to flammable in presence of heat. This substance itself does not burn, but may decompose upon heating to produce corrosive and/or toxic fumes. If accidentally mixed with oxidizers like potassium chlorate, potassium nitrate or potassium nitrite, there is an explosion hazard during fire. A mixture of ammonium sulfate and ammonium nitrate can easily be exploded by potassium or sodium-potassium alloy.

SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.

Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Keep away from heat. Keep away from sources of ignition. Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents.

Keep container tightly closed. Keep container in a cool, well-ventilated area.

Do not ingest. Avoid contact with skin and eyes.

Keep away from heat. Keep away from sources of ignition.

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Gloves.

Splash goggles.

Dust respirator. Be sure to use an approved/certified respirator or equivalent. A self contained breathing apparatus should be used to avoid inhalation of the product.

Lab coat. Full suit. Boots.

The product is stable.

Highly reactive with oxidizing agents. Reactive with alkalis.

Will not occur.

Excess heat, incompatible materials.

Potassium + ammonium nitrate, potassium chlorate, potassium nitrate, potassium nitrite, sodium hypochlorite, sodium/potassium alloy + ammonium nitrate. Substance should not contact either zinc or copper bearing materials.