Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SIGMACOVER 435 BASE
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- PR-974973
Identified Uses
verf
Manufacturers & Suppliers
PPG Coatings SPRL/BVBA
manufacturer
Noordersingel 23, B-2040 Borgerhout
+32 3 3606311
Emergency Contacts
Emergency Contact
+31 20 4075210
NATIONAL POISONS INFORMATION CENTRE
+31 30 2748888
CENTRE ANTI-POISONS/ANTIGIFCENTRUM
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
De producent verklaart dat voor de in hoofdstuk 3 niet vermelde R-zinnen, de totale hoeveelheid gevaarlijke componenten beneden de grens liggen.Het benzeengehalte van dit product is minder dan 0,1%.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| xyleen EC: 215-535-7 | 1330-20-7 | 10 - 12.5% | Yes |
| 2-methylpropaan-1-ol EC: 201-148-0 | 78-83-1 | 1 - 2.5% | Yes |
| ethylbenzeen EC: 202-849-4 | 100-41-4 | 2.5 - 10% | Yes |
| reactieprodukt: bisfenolA-epichloorhydrine epoxyhars | 25068-38-6 | 5 - 10% | Yes |
| 1-methoxy-2-propanol EC: 203-539-1 | 107-98-2 | 1 - 2.5% | Yes |
| nonylfenol EC: 246-672-0 | 25154-52-3 | 1 - 2.5% | Yes |
| aluminium EC: 231-072-3 | 7429-90-5 | 2.5 - 10% | Yes |
| nafta (aardolie), met waterstof behandeld zwaar EC: 265-150-3 | 64742-48-9 | 1 - 2.5% | Yes |
Dit veiligheidsinformatieblad is opgesteld overeenkomstig Bijlage I van Verordening (EG) nr. 453/2010.
Notes
Nota P en H zijn van toepassing. - Kandidaat-lijst van zeer zorgwekkende stoffen voor autorisatie
First Aid Measures
Emergency procedures for chemical exposure incidents
Verse lucht toedienen. Betreffende persoon in rusttoestand brengen en warm houden. Bij onregelmatige ademhaling of ademstilstand kunstmatige beademing toepassen. Bij bewusteloosheid stabiele zijligging toepassen en medische advies inwinnen.
Verontreinigde kleding onmiddellijk uittrekken. De huid grondig wassen met water en zeep of een erkende huidreiniger.
Oogleden openhouden en minstens 10 minuten lang rijkelijk met zuiver, vloeiend water spoelen. Contactlenzen uitdoen. Medisch advies inwinnen.
Bij inslikken direkt arts raadplegen. Het slachtoffer laten rusten.
Immediate Medical Attention
Als de ziekteverschijnselen niet van voorbijgaande aard zijn en in geval van twijfel dient medische hulp te worden ingeroepen. Bij een ongeval of indien men zich onwel voelt onmiddellijk een arts raadplegen (indien mogelijk het etiket tonen). Dit veiligheidsinformatieblad aan de dienstdoende arts tonen.
Medical Treatment
Symptomatisch behandelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation must be present for any spray particles and solvent vapors, especially if workers are in a spray booth. This includes local exhaust ventilation to reduce exposure.
For prolonged or repeated contact, use chemical-resistant gloves as indicated in standard EN 374: Protective gloves against chemicals and microorganisms. Recommended gloves: Viton (R) with a minimum breakthrough time of 480 minutes. For long-term and regular contact, a glove with protection class 6 (breakthrough time more than 480 minutes according to EN 374) is recommended. For short contact, a glove with protection class 2 or higher (breakthrough time greater than 30 minutes according to EN 374) is recommended. The choice of specific gloves should be based on all relevant workplace factors, including other chemicals used, physical requirements, possible body reactions to glove material, and supplier instructions.
Wearing chemical-resistant safety glasses is mandatory. Sealed glasses are recommended.
If workers are in a spray booth, they must wear a fresh-air hood during the spraying process until the concentration has fallen below the MAC value. A P2A2 half-face combination mask is recommended.
Personnel must wear protective clothing. Wash thoroughly after skin contact. Work clothing should not consist of textiles that exhibit dangerous melting behavior in case of fire. Wearing anti-static shoes is mandatory.
Refer to national legislation in chapter 15 for regulations regarding environmental protection.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SIGMACOVER 435 BASE?
The signal word is na: r-phrases.
What is SIGMACOVER 435 BASE used for?
verf