Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MIERENZUUR >39% - <=78.5%
- Product Code
- 45355
- Synonyms
- MIERENZUUR 72,5%, MIERENZUUR 50%, MIERENZUUR 40%, MIERENZUUR 85%V SOL, FORMIC ACID 75%, FORMIC ACID 85%V SOL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industriële toepassingen Levensmiddelen / diervoeder additief Chemische producten voor de synthese en / of formulering van industrieproducten Schoonmaakmiddel. laboratorium reagens Polymeer Biocide oppervlaktecoating
Manufacturers & Suppliers
Univar Zwijndrecht N.V.
distributor
Noordweg 3, 3336 LH Zwijndrecht, Nederland
+31 78 6250000
Emergency Contacts
SGS
+32 (0) 3 575 55 55
24h
Nationaal Vergiftigingen Informatie Centrum
+31 30 2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MIERENZUUR...% EC: 200-579-1 | 64-18-6 | 60 - 100% | Yes |
Notes
De vermelde gegevens zijn in overeenkomst met de meest recente EG-richtlijnen.
First Aid Measures
Emergency procedures for chemical exposure incidents
Breng de getroffen persoon direct in de frisse lucht. Raadpleeg onmiddellijk een arts.
Symptoms: Bijtend voor de luchtwegen. Schadelijk bij inademing.
Verontreinigde kleding verwijderen en de huid grondig spoelen met water. Raadpleeg onmiddellijk een arts.
Symptoms: Veroorzaakt ernstige brandwonden.
Spoel onmiddellijk met volop water. Verwijder eventuele contactlenzen en trek oogleden ver uit elkaar. Doorgaan met spoelen gedurende tenminste 15 minuten. Raadpleeg onmiddellijk een arts. Doorgaan met spoelen.
Symptoms: Veroorzaakt ernstig oogletsel. Kan blijvend letsel veroorzaken als het oog niet onmiddellijk wordt gespoeld.
Breng getroffen persoon in de frisse lucht en houdt deze warm en rustig in een positie gemakkelijk voor ademhaling. Mond goed spoelen met water. Geef volop water te drinken. NIET laten braken. Onmiddellijk medische hulp inschakelen.
Symptoms: Kan chemische verbrandingen in mond en keelholte veroorzaken. Schadelijk bij inslikken.
Immediate Medical Attention
Raadpleeg onmiddellijk een arts.
Medical Treatment
Behandel symptomatisch. Inhalatiesteroïd dosis aerosol.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Blussen met alcoholbestendig schuim, koolzuur, bluspoeder of waternevel.
Gebruik geen waterstraal als blusmiddel, dit zal de brand uitbreiden.
Firefighter Protection
Draag overdruk persluchtapparatuur (SCBA) en toepasselijke beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Volg de voorzorgsmaatregelen voor veilig hanteren als beschreven in dit veiligheidsinformatieblad. Aanraking met de ogen en de huid vermijden.
Vermijd afvoer naar grond en aquatisch milieu.
Verzamel en plaats in geschikte afvalcontainers en sluit stevig af.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Vermijd inademen van dampen/spray en contact met huid en ogen. Vermijd hitte, vlammen en andere ontstekingsbronnen. Zorg voor adequate ventilatie.
Opslaan in goed gesloten, originele verpakking op een droge, koele en goed geventileerde plaats. Opslaan bij temperaturen tussen > 0°C en < 30°C. Niet aan direct zonlicht blootstellen.
Vermijd hitte, vlammen en andere ontstekingsbronnen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Zorg voor voldoende ventilatie. Grenswaarden in acht nemen en risico van inademing van dampen tot minimum beperken.
De meest geschikte handschoen dient te worden gekozen in overleg met de handschoen leverancier/fabrikant, die informatie over de doorbraaktijd van het handschoenmateriaal kan geven. De geselecteerde handschoenen moeten een doorbraaktijd van minstens 8 uur hebben. Butylrubber. handschoen dikte 0.7mm Chloropreen rubber. handschoen dikte 0.5mm EN 374
Draag goed aansluitende chemische spatdichte zuurbril of een gelaatsscherm. EN 166
Adembescherming moet gebruikt worden als de besmetting in de lucht hoger is dan de aanbevolen beroepsmatige blootstellingsgrenswaarde. Combinatie filter, type B+E/P3. Respirator with ABEK filter EN 136/140/145/143/149
Draag geschikte kleding om iedere mogelijkheid van vloeistof contact en herhaald of langdurig contact met damp te voorkomen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel bij normale omgevingstemperaturen en indien gebruikt als aanbevolen.
Reageert met alkaliën en aminen en wekt warmte op.
Reacties met de volgende stoffen kunnen warmte genereren: Basen. Amines.
Bewaren bij een temperatuur beneden 30°C.
Basen. Amines. Sommige metalen.
Thermische ontbinding of verbranding kan koolstofoxiden en andere vergiftige gassen of dampen vrijmaken.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Voer afvalstoffen af naar een vergunninghoudende stortplaats in overeenstemming met de eisen van de plaatselijke afvalverwerkingsautoriteiten.
Niet doorboren of verbranden, zelfs wanneer leeg.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3412
- Shipping Name
- FORMIC ACID
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is MIERENZUUR >39% - <=78.5% known by?
MIERENZUUR >39% - <=78.5% is also known as: MIERENZUUR 72,5%, MIERENZUUR 50%, MIERENZUUR 40%, MIERENZUUR 85%V SOL, FORMIC ACID 75%, FORMIC ACID 85%V SOL
What is the hazard signal word for MIERENZUUR >39% - <=78.5%?
The signal word is danger.
What is the physical form of MIERENZUUR >39% - <=78.5%?
MIERENZUUR >39% - <=78.5% is a vloeistof. appearing as vloeistof. with kleurloos tot lichtgeel. color. It has prikkelend. odor.
What is the solubility of MIERENZUUR >39% - <=78.5%?
Oplosbaar in water.
What is MIERENZUUR >39% - <=78.5% used for?
Industriële toepassingen Levensmiddelen / diervoeder additief Chemische producten voor de synthese en / of formulering van industrieproducten Schoonmaakmiddel. laboratorium reagens Polymeer Biocide oppervlaktecoating
What are the hazard statements for MIERENZUUR >39% - <=78.5%?
This substance has 2 hazard statements:
- H302 + H332: Schadelijk bij inslikken en bij inademing.
- H314: Veroorzaakt ernstige brandwonden en oogletsel
What is the melting point of MIERENZUUR >39% - <=78.5%?
The melting point is -27.6°C and the boiling point is 107.5°C @ 760 mm Hg.