Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANILINE
- Product Code
- 000000000000025275
- Chemical Name
- aniline
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 200-539-3 Check regulations →
- REACH No.
- 01-2119451454-41
Identified Uses
tussenproduct
Manufacturers & Suppliers
LANXESS Deutschland GmbH
manufacturer
Production, Technology, Safety & Environment, 51369 Leverkusen, Germany
+49 221 8885 2288
Emergency Contacts
CHEMTREC EMEA
+44 20 3885 0382
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| aniline EC: 200-539-3 | 62-53-3 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Overbrengen in de frisse lucht. Bij benauwdheid zuurstof laten inhaleren, zorgen voor lichamelijke rust, tegen warmteverlies beschermen. Onmiddellijk medische hulp inroepen. In geval van blauwe verkleuring (lippen, oorlellen, vingernagels), zo snel mogelijk zuurstof toedienen.
Symptoms: Benauwdheid, blauwe verkleuring (lippen, oorlellen, vingernagels).
Na aanraking met de huid onmiddellijk wassen met een polyethyleen-glycoloplossing, gevolgd door veel water. Onmiddellijk een arts waarschuwen.
Grondig met veel water spoelen gedurende tenminste 15 minuten. Onbeschadigd oog beschermen. Contactlenzen uitnemen. Onmiddellijk medische hulp inroepen.
Mond spoelen met water. Onmiddellijk veel water geven (indien mogelijk houtskoolsuspensie). Nooit een bewusteloos persoon laten drinken (of eten). Bij inslikken, NOOIT braken opwekken. Medische hulp inroepen.
Immediate Medical Attention
Onmiddellijk medische hulp inroepen (bij inademing, oogcontact en inslikken). Onmiddellijk een arts waarschuwen (bij huidcontact). Een arts raadplegen (algemeen advies).
Medical Treatment
Eerste Hulp, decontaminatie, symptomatische behandeling, afhankelijk van de methaemoglobinevorming, toluidineblauw of andere Redox-kleurstoffen intraveneus volgens doseervoorschrift alsook ascorbinezuur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Specific hand protection requirements include: Material: butylrubber - IIR, Breakthrough time: >= 480 min, Glove thickness: 0,5 mm, Usage time: < 60 min. OR Material: fluorrubber - FKM, Breakthrough time: >= 480 min, Glove thickness: 0,4 mm, Usage time: < 60 min. Note: The suitability for a specific workplace must be discussed with the manufacturer of the protective gloves.
Eye and face protection specifications include: Close-fitting safety goggles or Face shield.
Respiratory protective equipment specifications include: In case of vapor formation, use a respirator with an approved filter type. For higher concentrations, use breathing apparatus with separate air supply (compressed air breathing apparatus, hose apparatus). Filter type: Combined inorganic and acid gas/inorganic and acid vapor, ammonia/amines and organic vapor (ABEK).
Body protection requirements include: Impermeable clothing. Choose protective clothing based on the quantity and concentration of the hazardous substance at the workplace. In case of possible contact with the product (e.g., sampling, release of the product): Full suit for protection against chemicals.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1547
- Shipping Name
- ANILINE
- Transport Class
- 6.1
- Packing Group
- II
Giftig., Brandbaar., Milieugevaarlijk., gevaar voor ernstig oogties. letsel, Gescheiden houden van voedings- en genotmiddelen
Giftig., Brandbaar., Milieugevaarlijk., gevaar voor ernstig oogties. letsel, Gescheiden houden van voedings- en genotmiddelen
Giftig., Brandbaar., Milieugevaarlijk., gevaar voor ernstig oogties. letsel, Gescheiden houden van voedings- en genotmiddelen
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANILINE?
The signal word is danger.
What is the physical form of ANILINE?
ANILINE is a vloeibaar with kleurloos, bruin color. It has kenmerkend odor.
What is the solubility of ANILINE?
Geen gegevens beschikbaar
What is ANILINE used for?
tussenproduct
What are the hazard statements for ANILINE?
This substance has 7 hazard statements:
- H301 + H311 + H331: Giftig bij inslikken, bij contact met de huid en bij inademing.
- H317: Kan een allergische huidreactie veroorzaken.
- H318: Veroorzaakt ernstig oogletsel.
- H341: Verdacht van het veroorzaken van genetische schade.
- H351: Verdacht van het veroorzaken van kanker.
- H372: Veroorzaakt schade aan organen bij langdurige of herhaalde blootstelling.
- H410: Zeer giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of ANILINE?
The melting point is -6,2 C and the boiling point is 184 C (1.013 hPa).