NextSDS Logo
E-

E-POS 573

DANGER Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
E-POS 573

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Epoxy resin. Industrial use.

Overview

E-POS 573 commonly used epoxy resin. industrial use..

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Aquatic Chronic Category 2 H411
Repr. Category 1B H360F
Skin Corr. Category 1C H314
Skin Sens. Category 1B H317

GHS Hazard Pictograms & Safety Symbols

GHS05 GHS Hazard Pictogram: Corrosive hazard - Materials that can cause severe skin burns and eye damage

GHS05

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H360F: May damage fertility.
  • H411: Toxic to aquatic life with long lasting effects.

Precautionary Statements

  • P201: Obtain special instructions before use.
  • P260: Do not breathe dust/fumes/gas/mist/vapours/spray.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P310: Immediately call a POISON CENTER/doctor.
  • IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • IF IN EYES: Rinse cautiously with water for several minutes. Remove
  • IF ON SKIN (or hair): Take off immediately all contaminated clothing.
  • IF INHALED: Remove person to fresh air and keep comfortable for breathing.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

QR Polymers B.V.

undefined

๐Ÿ“

Smederijstraat 2 NL-4814 DB Breda

๐ŸŒ

NL

๐Ÿ“ 

+31 76 531 77 01

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+31 76 531 79 21

๐ŸŒ

NL

๐Ÿ•’

8:30 - 17:00

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Mixtures

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
2,2'-[(1-METHYLETHYLIDENE)BIS(4,1-PHENYLENEOXYMETHYLENE)]BISOXIRANE
EC: 216-823-5
1675-54-3 70-95% โš ๏ธ Hazardous
1,3-PROPANEDIOL, 2-ETHYL-2-(HYDROXYMETHYL)-, POLYMER WITH (CHLOROMETHYL)OXIRANE
EC: 608-489-8
30499-70-8 10-20% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Move to fresh air in case of accidental inhalation of vapours.

๐Ÿ–๏ธ Skin Contact

Wash immediately with plenty of soap and water. Consult a doctor.

๐Ÿ‘๏ธ Eye Contact

Bathe the eye with running water for 15 minutes. Consult a doctor.

๐Ÿฝ๏ธ Ingestion/Swallowing

Do not induce vomiting. Give 1 cup of water to drink every 10 minutes. Consult a doctor.

๐Ÿšจ Immediate Medical Attention Required

Show this safety data sheet to the doctor in attendance.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
Liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Not available
๐ŸŽจ Colour
Pale yellow
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
Characteristic odour
๐Ÿ“Š Odor Threshold
Not available
๐Ÿงช Ph
Approx. 7
๐ŸงŠ Melting Point
No data available.
Critical Property
๐Ÿ’จ Boiling Point
>200
Critical Property
๐Ÿ”ฅ Flash Point
>110
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
No data available.
๐Ÿ’จ Vapor Pressure
No data available.
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
No data available.
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
Not available
๐Ÿ”ฅ Flammability
Not available
๐Ÿ“Š Upper Explosive Limit
Not applicable.
๐Ÿ“Š Lower Explosive Limit
Not applicable.
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
No data available.
๐Ÿ“Š Decomposition Temperature
Not available
๐Ÿ’ง Solubility
Not available
๐Ÿ“Š Partition Coefficient
No data available.
๐Ÿ“Š Solubility In Water
Insoluble
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Voc Content
No data available.
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
Not available
๐Ÿ“Š Kinematic Viscosity
Not available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

Ensure there is sufficient ventilation of the area.

๐Ÿงค Hand Protection

Protective gloves. Breakthrough time of the glove material > 8 hours.

๐Ÿ‘๏ธ Eye Protection

Safety glasses with side-shields.

๐Ÿ˜ท Respiratory Protection

Self-contained breathing apparatus must be available in case of emergency.

๐Ÿฆบ Skin/Body Protection

Protective clothing.

๐ŸŒ Environmental Exposure Controls

Refer to specific Member State legislation for requirements under Community environmental legislation. Prevent from entering in public sewers or the immediate environment.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN1760

๐Ÿ“ฆ Proper Shipping Name

CORROSIVE LIQUID, N.O.S. (1,3-PROPANEDIOL, 2-ETHYL-2-(HYDROXYMETHYL)-, POLYMER WITH (CHLOROMETHYL)OXIRANE)

โš ๏ธ Transport Hazard Class

8

๐Ÿ“‹ Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for E-POS 573?

The signal word for this substance is "danger".

What is the physical form of E-POS 573?

E-POS 573 is a liquid with pale yellow color. It has characteristic odour odor.

What is E-POS 573 used for?

Epoxy resin. Industrial use.

What are the hazard statements for E-POS 573?

This substance has 4 hazard statements: H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H360F: May damage fertility. H411: Toxic to aquatic life with long lasting effects.

What is the melting point of E-POS 573?

The melting point is No data available. and the boiling point is >200.