NextSDS Logo
Safety Data Sheet NL

4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon
Product Form
Zuivere stof
Chemical Name
4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon

Regulatory Identifiers

CAS Number
N/A
REACH No.
01-2119473980-30

Identified Uses

Zie tabel op de eerste pagina van de bijlage.

Uses advised against

Dit product wordt niet aanbevolen voor industrieel, beroepsmatig of consumentengebruik anders dan vermeld in tabel op de eerste pagina van de bijlage.

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2 H319
Acute Tox. Cat. 4 H332
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Licht ontvlambare vloeistof en damp.
H319 Veroorzaakt ernstige oogirritatie.
H332 Schadelijk bij inademing.
H335 Kan irritatie van de luchtwegen veroorzaken.

Precautionary Statements

P210 Verwijderd houden van warmte, vonken, open vuur of hete oppervlakken – niet roken.
P243 Maatregelen treffen tegen ontladingen van statische elektriciteit.
P261 Inademing van stof, rook, gas, nevel, damp, spuitnevel vermijden.
P304 + P340 NA INADEMING : In de frisse lucht brengen en laten rusten in een houding die het ademen vergemakkelijkt.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN : Voorzichtig afspoelen met water gedurende een aantal minuten. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen.
P403 + P233 Op een goed geventileerde plaats bewaren. In goed gesloten verpakking bewaren.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
4-Methyl-2-pentanon EC: 203-550-1 108-10-1 99% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Het slachtoffer in de frisse lucht brengen. Slachtoffer rustig houden, in halfzittende houding. Als het slachtoffer niet of onregelmatig ademt, kunstmatige beademing toepassen. Onmiddellijk een arts raadplegen.

Skin contact

Verontreinigde kledij uittrekken. Huid onmiddellijk spoelen met veel water. (ev. douchen). Bij (blijvende) irritatie, een arts raadplegen.

Symptoms: Bij (blijvende) irritatie

Eye contact

Onmiddellijk grondig en langdurig (minstens 15 min.) spoelen met veel water. Contactlenzen verwijderen. Oogarts consulteren. Oog blijven spoelen of druppelen tijdens vervoer.

Ingestion

NIET LATEN BRAKEN. De mond spoelen met water. ONMIDDELLIJK een arts raadplegen of naar ziekenhuis vervoeren.

Immediate Medical Attention

Onmiddellijk een arts raadplegen (inademing), Oogarts consulteren (ogen), ONMIDDELLIJK een arts raadplegen of naar ziekenhuis vervoeren (inslikken). Voor specialistisch advies dient de arts contact op te nemen met het NVCI of het Belgisch Antigifcentrum.

Medical Treatment

Voor specialistisch advies dient de arts contact op te nemen met het NVCI of het Belgisch Antigifcentrum.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Bluspoeder, Schuim, Koolstofdioxide (CO2), Verneveld water, Zand.

Unsuitable media

Sterke waterstraal.

Specific hazards

Bij brand kunnen koolstofoxiden (o.a. CO) en rook vrijkomen.

Instructions

Gebruik (verneveld) water om de naburige verpakkingen en constructies af te koelen.

Firefighter Protection

In de onmiddellijke nabijheid van het vuur een onafhankelijk ademhalingstoestel en beschermende kledij dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ontruim onmiddellijk de besmette ruimtes. Vermijd inademing van de dampen en aanraking met de ogen, de huid en de kledij.

Environmental

Verhinder dat het product in open water, riolering of de bodem terechtkomt.

Cleanup methods

Lekvloeistof opvangen in afsluitbare afvalvaten. Gemorst product zo snel mogelijk opruimen d.m.v. een inert, absorberend product.

Materials: inert, absorberend product

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

VERMIJD VORMING VAN NEVEL ! Vermijd inademing van de dampen en aanraking met de ogen, de huid en de kledij. Draag geschikte, persoonlijke veiligheidsuitrusting. (Zie rubriek 8) Niet eten, drinken, of roken tijdens gebruik. In de onmiddellijke nabijheid van elke mogelijke blootstellingsbron moeten veiligheidsoogdouches en nooddouches aanwezig zijn. Voor destillatie: controleren op aanwezigheid van peroxiden.

Storage

Uitsluitend in de oorspronkelijke, goed gesloten verpakking bewaren op een koele, goed geventileerde en brandveilige plaats.

Hygiene

Niet eten, drinken, of roken tijdens gebruik.

Fire prevention

Alle ontstekingsbronnen verwijderen (open vuur, vonken, roken, ...). Maatregelen nemen tegen elektrostatische ontlading.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilatie, Plaatselijke afzuiging.

Hands

Geschikt materiaal voor veiligheidshandschoenen (EN 374): Butylrubber : penetratietijd 240' - dikte 0,7 mm

Eyes

Aansluitende veiligheidsbril of gelaatsscherm.

Respiratory

CE-goedgekeurd masker voor organische dampen en oplosmiddelen (type A, bruin).

Skin/Body

Geschikte beschermingskledij.

Environmental

Zie rubrieken 6, 7, 12 en 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Vloeistof
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Helder, Kleurloos
Colour
Kleurloos
Colour Intensity
---
Form
---
Odor
Kamfergeur
Odor Threshold
0,68 ppm
Ph
6-7
Melting Point
-84 °C
Boiling Point
116 °C
Flash Point
14 °C
Freezing Point
-84 °C
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
5,6 (Ether = 1) 1,6 (Butylacetaat = 1)
Vapor Pressure
2 kPa (20°C), 9,1 kPa (50°C)
Vapor Density
---
Relative Density
0,8
Bulk Density
---
Density
0,7978 g/cm³
Flammability
P1
Upper Explosive Limit
8 vol.%
Lower Explosive Limit
1,2 vol.%
Explosive Limits
---
Auto Ignition Temperature
460 °C
Decomposition Temperature
448 °C
Solubility
1,4 g/100 ml (in water), Oplosbaar in Chloroform, Mengbaar met Ethanol, Diethylether, Aceton, Benzeen
Partition Coefficient
1,11 - 1,51
Solubility In Water
1,4 g/100 ml
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
0,585 mPa.s
Kinematic Viscosity
0,73 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stabiel bij normale omstandigheden.

Reactivity

Reageert heftig met oxidatiemiddelen, sterke zuren en sterke basen.

Hazardous reactions

Bij blootstelling aan de lucht : Kan peroxiden vormen.

Avoid

Hoge temperaturen.

Incompatible

Oxidatiemiddelen, Sterke zuren, Sterke basen, Diverse kunststoffen, Rubber.

Decomposition

Koolstofoxiden.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1245
Shipping Name
Methylisobutylketon
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon?

The signal word is danger.

What is the physical form of 4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon?

4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon is a vloeistof appearing as helder, kleurloos with kleurloos color. It has kamfergeur odor.

What is the solubility of 4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon?

1,4 g/100 ml (in water), Oplosbaar in Chloroform, Mengbaar met Ethanol, Diethylether, Aceton, Benzeen

What is 4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon used for?

Zie tabel op de eerste pagina van de bijlage.

What are the hazard statements for 4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon?

This substance has 4 hazard statements:

  • H225: Licht ontvlambare vloeistof en damp.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H332: Schadelijk bij inademing.
  • H335: Kan irritatie van de luchtwegen veroorzaken.

What is the melting point of 4-Methyl-2-pentanon, Methylisobutylketon, Isopropylaceton, Hexanon?

The melting point is -84 °C and the boiling point is 116 °C.