Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LCK 614 CSB/COD/DCO
- Product Code
- LCK614
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Wateranalyse
Manufacturers & Suppliers
HACH LANGE GmbH
manufacturer
Willstätterstr. 11, D-40549 Düsseldorf
+49 (0)211 5288-383
www.de.hach.com
HACH
national supplier
Laan van Westroijen 2a, NL-4003 AZ Tiel
+31 (0)3 44 63 11 30
HACH LANGE NV/SA
national supplier
Motstraat 54, B-2800 Mechelen
+32 (0)15 423500
Emergency Contacts
Emergency Contact
+31 (0)30 2 74 88 88
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zwavelzuur ... % EC: 231-639-5 | 7664-93-9 | 90% | Yes |
| Water EC: 231-791-2 | 7732-18-5 | 8% | No |
| Kwik(II)sulfaat EC: 231-992-5 | 7783-35-9 | 1.7% | Yes |
| Zilversulfaat EC: 233-653-7 | 10294-26-5 | 0.5% | Yes |
| kaliumdichromaat EC: 231-906-6 | 7778-50-9 | 0.1% | Yes |
Dit product bevat zeer zorgwekkende stoffen (Verordening (EG) Nr. 1907/2006 (REACH), Artikel 57). kaliumdichromaat
First Aid Measures
Emergency procedures for chemical exposure incidents
In de frisse lucht brengen. Een arts raadplegen. Dit veiligheidsinformatieblad aan de dienstdoende arts tonen.
Onmiddellijk met veel water afwassen gedurende tenminste 15 minuten. Onmiddellijke medische behandeling is noodzakelijk, omdat onbehandelde huidaantasting langzaam en moeilijk te genezen worden veroorzaakt. Dit veiligheidsinformatieblad aan de dienstdoende arts tonen.
Grondig met veel water spoelen gedurende tenminste 15 minuten en een arts raadplegen. Dit veiligheidsinformatieblad aan de dienstdoende arts tonen.
Mond reinigen met water en daarna veel water drinken. GEEN braken opwekken. Een arts raadplegen. Dit veiligheidsinformatieblad aan de dienstdoende arts tonen.
Immediate Medical Attention
Onmiddellijke medische behandeling is noodzakelijk bij aanraking met de huid.
Medical Treatment
Symptomatisch behandelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving. Het product zelf brandt niet.
Firefighter Protection
Bij brand een persluchtmasker dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Niet naar het oppervlaktewater of de riolering laten afvloeien.
Opnemen in inert absorberend materiaal en als gevaarlijk afval afvoeren.
Materials: inert absorberend materiaal
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Uitsluitend op goed geventileerde plaatsen gebruiken. Dampen/stof niet inademen.
Goed gesloten bewaren op een droge, koele en goed geventileerde plaats. Beschermen tegen licht.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technische maatregelen en geschikte werkprocedures zouden prioriteit moeten hebben boven het gebruik van persoonlijke beschermingsmiddelen.
Huid preventief beschermen met huidbeschermende zalf. Chemicaliënbestendige handschoenen van butylrubber of nitrilrubber, categorie III volgens EN 374. Bij vol contact: Handschoen materiaal: Viton Dikte van de laag: 0,70 mm Doorbraaktijd > 480 min Bij sprei contact: Handschoen materiaal: Nitril Dikte van de laag: 0,20 mm Doorbraaktijd > 30 min
Veiligheidsbril met zijkleppen
Ademhalingsapparaat alleen nodig indien er aerosol of stof gevormd is. Aanbevolen filtretype: ABEK-filter
Verontreinigde kleding verwijderen en wassen voor hergebruik.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder de aanbevolen opslagomstandigheden.
Bijtend voor metalen
Gevaarlijke polymerisatievormen zijn niet bekend.
Niet oververhitten om thermische ontleding te voorkomen. Boven 300 °C kunnen gevaarlijke gassen vrijkomen.
Organische materialen, Basen, Alkalimetalen, Metalen, Ammoniak, Reductiemiddelen, Salpeterzuur.
Zwaveltrioxide, Chroomoxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3316
- Shipping Name
- CHEMICAL KIT
- Transport Class
- 9
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LCK 614 CSB/COD/DCO?
The signal word is danger.
What is the physical form of LCK 614 CSB/COD/DCO?
LCK 614 CSB/COD/DCO is a vloeistof with geel-oranje color. It has reukloos odor.
What is LCK 614 CSB/COD/DCO used for?
Wateranalyse
What are the hazard statements for LCK 614 CSB/COD/DCO?
This substance has 7 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H302: Schadelijk bij inslikken.
- H311: Giftig bij contact met de huid.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H332: Schadelijk bij inademing.
- H373: Kan schade aan organen veroorzaken bij langdurige of herhaalde blootstelling.
- H410: Zeer giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of LCK 614 CSB/COD/DCO?
The melting point is niet van toepassing and the boiling point is 300 °C.