Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Liebherr Motoroil 10W-40
- Product Code
- 21001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Engine oil
Manufacturers & Suppliers
LIEBHERR-LOGISTICS GmbH
manufacturer
St. Vitus 1 D - 88457 Kirchdorf an der Iller
LIEBHERR-COMPONENTS BIBERACH GmbH
manufacturer
Hans-Liebherr-Strasse 45 D - 88400 Biberach an der Ri
LIEBHERR-WERK BIBERACH GmbH
manufacturer
Memminger Strae 120 D - 88400 Biberach an der Ri
LIEBHERR-WERK EHINGEN GmbH
manufacturer
Dr .- Hans-Liebherr-Strasse 1 D - 89584 Ehingen
LIEBHERR-MISCHTECHNIK GmbH
manufacturer
Im Elchgrund 12 D - 88427 Bad Schussenried
LIEBHERR-MINING EQUIPMENT COLMAR SAS
manufacturer
49 rue Frdric Hartmann CS 50038 F - 68025 Colmar Cedex
LIEBHERR-WERK NENZING GmbH
manufacturer
Dr .- Hans-Liebherr-Strasse 1 A - 6710 Nenzing
LIEBHERR NENZING CRANE Co.
manufacturer
7075 Bennington Street USA - Houston, Texas 77028
LIEBHERR CONSTRUCTION EQUIPMENT Co.
manufacturer
4100 Chestnut Avenue USA - Newport News, VA 23607
LIEBHERR CRANES, Inc.
manufacturer
4100 Chestnut Avenue USA - Newport News, VA 23607
LIEBHERR MINING EQUIPMENT Co.
manufacturer
4100 Chestnut Avenue USA - Newport News, VA 23607
LIEBHERR CONCRETE TECHNOLOGY Co.
manufacturer
4100 Chestnut Avenue USA - Newport News, VA 23607
Liebherr-Lubricant-Hotline
Emergency Contacts
Emergency Contact
+ 49 73 54 / 80-6060
During working hours (CET)
CHEMTREC
+1-703-527-3887
24 hours
CHEMTREC
1-800-424-9300
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mineral oil, viscosity <20.5 mm2/s at 40 | --- | 50 - 100% | Yes |
| Zink alkyldithiofosfaat EC: 272-028-3 | 68649-42-3 | 2.5% | Yes |
The wording of the hazard symbols and R-phrases is specified in section 16 if dangerous ingredients are mentioned. Components with threshold limit values are mentioned in section 8.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Immediately wash with water and soap and rinse thoroughly. Remove contaminated clothing.
Rinse opened eye for several minutes under running water. If persistent irritation occurs, obtain medical attention.
Symptoms: persistent irritation
Do not induce vomiting; immediately call for medical help. Do not induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Where hand contact with the product may occur the use of gloves approved to relevant standards (ASTM F 739) made from fluorcarbon rubber (Viton) or nitrile rubber may provide suitable chemical protection. Suitability, penetration time of substances and durability of a glove is dependent on usage, e.g., frequency and duration of contact, chemical resistance of glove material, glove thickness and dexterity. Always seek advice from glove supplier. Protective gloves will deteriorate over time due to physical and chemical damage. Inspect and replace gloves on a regular basis. The frequency of replacement will depend upon circumstances of use. Consult with manufacturer of the gloves in case of long term exposure.
Safety glasses with side shields recommended during refilling or if splashes are likely to occur.
No respiratory protection is ordinarily required under normal conditions of use. Select a filter suitable for combined particulate/ gases and organic vapours (boiling point > 65 , EN 14387), if exposure limit is exceeded or when aerosol or mist is formed.
Protective work clothing. Preventive skin protection by use of skin-protecting agents is recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Void
- Shipping Name
- Void
- Transport Class
- Void
- Packing Group
- Void
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Liebherr Motoroil 10W-40?
The signal word is no signal word.
What is the physical form of Liebherr Motoroil 10W-40?
Liebherr Motoroil 10W-40 is a fluid with amber colored color. It has mild odor.
What is Liebherr Motoroil 10W-40 used for?
Engine oil
What is the melting point of Liebherr Motoroil 10W-40?
The melting point is Undetermined. and the boiling point is Undetermined..