Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LASERTONER ERS. HP CF542A
- Product Code
- KF11340.
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Office printing
Manufacturers & Suppliers
INTERACTION-CONNECT S.A.
distributor
296-298 route de Longwy.L-1940.Luxembourg.Luxembourg.
+32 9 380 82 48.
Emergency Contacts
Centre antipoisons
+352 8002 5500.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
CAS 42405-40-3, <1.5%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| CAS 42405-40-3 | 42405-40-3 | 1.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Watch out for any remaining product between skin and clothing, watches, shoes, etc.
Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open. If there is any redness, pain or visual impairment, consult an ophthalmologist.
Seek medical attention, showing the label.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
HP LaserJet CE390A-X-XC-XD Print Cartridge
---
TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner
---
EPSON Ink Cartridge T824A
---
EPSON Ink Cartridge T824B
---
EPSON Ink Cartridge T8246
---
EPSON Ink Cartridge T8245
---
EPSON Ink Cartridge T8249
---
EPSON Ink Cartridge T8244
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
Avoid inhaling dust. Wear a disposable half-mask dust filter in accordance with standard EN149/A1.
Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LASERTONER ERS. HP CF542A?
The signal word is no signal word.
What is the physical form of LASERTONER ERS. HP CF542A?
LASERTONER ERS. HP CF542A is a powder or dust. with yellow color.
What is LASERTONER ERS. HP CF542A used for?
Office printing
What is the melting point of LASERTONER ERS. HP CF542A?
The melting point is Not specified. and the boiling point is Not specified..